It is easy to construct a pool in the backyard, but it is quite cumbersome to maintain it. Yes, it is an ongoing task and ignorance or negligence will make it a shabby, smelly pool. |
Surprisingly, keeping a pool in a healthy condition is not that difficult as you think. It is not rocket science. The only thing is, you should perform the maintenance routine regularly. Understand the basic operations and use of the tools and equipment.
You should be able to troubleshoot the basic problems and should not be dependent on swimming pool companies in Bangalore for every small issue.
Here are some simple things that can be done to keep the pool in a healthy state.
Maintain the pump regularly
The pump requires very less maintenance actually, but it becomes a big issue when you neglect it for a long time. Most pumps are self-priming which means water gets locked in the suction chamber so that you needn’t fill it every time.
However, sometimes it becomes dry and can’t lift water. In such case, you need to prime it manually. To clean the strainer basket, you should read the instruction manual. It is a good practice to clean it periodically. When you clean it, look at the gasket or washer. If it is cracked, then better replace it.
Bigger problem such as suction doesn’t work, or there is strange noise from the pump require expert help. Call any of the expert swimming pool companies in Bangalore for advice.
Filters need regular maintenance as there is always an excessive load. Periodic cleaning keeps the filters in good shape. Filter cleaning frequency depends on the usage of the pool and quality of water. Experts say that cleaning the filters too early doesn’t help. Rather, it hampers the performance. A fully clean filter is less efficient as compared to a slightly dirty one.
Typically, in a moderately busy pool, you need to clean filters once a month to once a quarter. Debris should be removed pretty regularly so that filters do not get overloaded.
Checking the pressure gauge
Check the flow meter and pressure gauge at regular interval. It shows the cleanliness of the filters. If there is an increased flow the gauge, then you need to clean filters. As a general cleaning advice, you should check the filter cleanliness if the difference is between 10 and 15 pounds/inch square.
Catch hold of the best swimming pool companies in Bangalore, who have a lot of experience in constructing the different sizes and capacities of swimming pool.
Related Articles -
swimming pool construction, swimming pool contractor,