|
It seems that almost everyone has heard of GPS (Global Positioning System) in one form or another. The most well known GPS device is the car navigation system that shows and tells the driver through voice commands how to get to their desired pre-programmed destination. But if you’re wondering how these little technological wonders work then you’ve come to the right place. A GPS receiver is an electronic device that uses the Global Positioning System to determine its exact location on earth with pin-point accuracy. This system is made up of the three parts; 27 satellites that send out continuous positioning signals, ground stations around the world that help synchronize the satellites, and various types of GPS receivers. In this article we’re going to concentrate on how a GPS receiver works within this system since it’s the piece of the GPS puzzle that keeps you from getting lost. Its main function is to calculate its position on the earth using the signals that it receives from the satellite system. To do this the receiver needs to lock onto the signals of at least 3 satellites. Once 3 or more satellites have been detected it then needs to determine the distance between the satellites and the distance between itself and each satellite. It then uses the basic math principles of triangulation or trilateration to compute its location on the earth’s surface. The signals a GPS receiver uses to figure its location are radio signals transmitted by the satellites. These radio signals have three bits of information embedded in them; ephemeris data, almanac data, and a pseudorandom code. Using this information the GPS unit is able to triangulate its position and report that back to its user. Accuracy is another question many first time users wonder about. The good news is GPS receivers are very accurate with the ability to pin-point your location to within a radius of 20 meters. There are ways to increase accuracy through the use of DGPS (Differential GPS) and WAAS (Wide Are Augmentation System) which can get within 3 meters of accuracy. Units with these two features normally cost more but the increase in accuracy can be well worth the cost. There are many factors that can and do affect how accurately a GPS unit reports its position. These include: 1. The number of visible satellites 2. Signal delays caused as they pass through the earths atmosphere 3. Signals bouncing off of objects 4. Inaccurate clock in the GPS unit 5. Ephemeris errors 6. Satellites in poor positions 7. Satellite signals that are blocked because of terrain or manmade features GPS is a great technology that has found its way into many everyday applications. Depending on your needs for keeping track of where you are there is sure to be a GPS receiver that fits the bill. There is no better choice then Magellan GPS Systems when it comes to finding your way in the world. To learn more about Magellan GPS Systems please Click Here.
Related Articles -
Gps receiver, gps unit, gps system, global positioning system,
| 
