Engineered floors refinishing NJ have seasoned professionals to bring out the long gone beauty and glory of your engineered floors. It can be very difficult to refinish engineered floors due to the veneer layer or hardwood wear layer that can rather be thick. It takes an expert wood technician to understand and know how to completely refinish an engineered floor. Engineered wood floors are factory finished and the coating is very strong, much stronger than any coating you can apply on site. This is what makes engineered wood floors very hard to refinish. There are also unfinished engineered flooring which allow you to choose the stain you want or put a different varnish of your choice. The wear layer of an engineered floor is also known as a wood veneer which is not real wood but can be sanded for refinishing and repair. This wood veneer is thinner than a solid floor with a thickness of usually 3mm. Engineered floors refinishing NJ use the proper tools and equipment that makes it possible to sand this type of floor with high quality finish. You must put in mind that not all engineered wood floors are made equal. An engineered floor with a wear layer of less than 3mm thickness will be very hard to refinish. Each manufacturer offers different thickness in the engineered floors they offer. If the wear layer of your engineered floor is too thin and makes it impossible to refinish, engineered floors refinishing NJ can improve the appearance of your floor through screening and coating. There are times when scratches are not possible to be removed with this type of wear layer but engineered floors refinishing NJ can replace your floors whenever necessary. Before work is done on our floor, it will be carefully evaluated and assessed by expert wood technicians to determine if refinishing is possible. It does not really matter if your floor has numerous highs and lows of if proper preparation was neglected during installation. This flooring company has the right equipment that can flatten and smoothen the surface of your floor so you get a smooth and even finish. Most people dread the dust that comes to refinishing but with this floor refinishing company, their professional floor servicemen will take care of all the dust so get clean, breathable air after all the work is done. You don’t need to worry about allergies, their professional wood technicians always do a pristine job and hey take pride in the work they do. You may also choose what finish will they use for your floor. An oil based finish will give you more shine and more glow but it takes more time to dry. On the other hand, water-based finishes dry quickly. They are also glossy but lacks the luster that oil based finishes offer. If you have allergies, water based finishes are recommended as they are friendlier to humans ad to the environment. In the end, it all boils down to choosing the right floor refinishing company such as engineered floors refinishing NJ. If you are looking for information regarding engineered floors refinishing NJ, you can click on the link. Or visit http://hardwoodfloorsrefinishingnj.com/engineered-floors-refinishing-nj/ today.
Related Articles -
engineered, floors, refinishing, NJ,
|