The prefinished wood floors available nationwide give you the option to skip finishing after installation. The wooden planks will already have stain or finish. Most people think that it is a convenient way to avoid messy on-site finishing. However, some get disappointed because damages on the surface during installation like scratches require refinishing. It is not that using prefinished wood planks is pointless. Problems are actually caused by incorrect prefinished wood floors installation. Installation of Prefinished Wooden Floor Installing prefinished and unfinished wooden floors are pretty much the same. You start by choosing and preparing your materials. Afterwards, you need to prepare the area, apply subfloor and vapor barrier, lay out the wooden planks, trim them, and fill in the gaps. It might seem so simple but not for someone who does not have experience in installing wooden floors, particularly the prefinished types. In fact, even an experienced floor installer needs to do it several times before he can master it. Cost of Prefinished Floor Installation The cost of installation is calculated by square foot. In 2013, the prefinished wood floors installation price ranges from $7 to $10 per square foot. It is a bit more expensive than unfinished wooden floor installation where the maximum cost is typically $5 per square foot. This is mainly due to the finish that is already applied to the wooden planks. Aside from the material, the total cost will also include labor and the hourly wage of installers. Here is a sample of the cost breakdown for installing a prefinished wooden floor in a 100-square-foot room. The floor itself may cost $450. Labor may take 4.5 to 5 hours so the labor fee may be estimated to be around $250. Other materials for the job may include adhesives, sealants, fasteners and underlayment. You may spend only $30 to $50 for these. For tools like floor nailers, some installers may also choose to charge an additional $15 to $20. The total cost may range from $700 to $900. Importance of Hiring a Pro Installer Installing a prefinished wood floor is highly discouraged as a DIY project unless you are an expert in such tasks. As mentioned earlier, the common complaint about prefinished wood floors is the need for refinishing after the installation. You can avoid additional tasks (and costs) if the floor will be carefully installed by an experienced contractor. In addition, professional installation can avoid an early need for repair. Prefinished wood planks and installation fees are higher compared to when you settle in unfinished wood floors. You may want to ensure that installation is done properly and protective layers such as vapor barriers are in place. There may be several companies in your area that offer prefinished wood floors installation services. Be sure to look for a reputable and experienced company that would not overcharge and provide service warranty. You can do this by asking your friends for recommendations, reading reviews and looking at portfolios. For the price, be sure that every detail of what the price covers is specified in writing. If you are looking for information on prefinished wood floors installation, just click on the link. Or you can visit http://hardwoodfloorscamdennj.com/prefinished-woodfloors-installation/ for more information!
Related Articles -
prefinished, wood, floors, installation,
|