|
A good tip for window cleaning is to use a strip washer and squeegee. A good tool to use is also a water fed pole and De-ionized water system of tank.When cleaning dirty windows, sometimes after you are finished or you have removed the surface dirt, you can still see water spots. This often happens when professional window cleaners are using a water fed pole, which is a very good cleaning tool used with a de-ionized water tank for spot free cleaning. There can be several reasons for this. Sometimes, when the glass is real dirty because it has not been maintained well, the glass will need to be cleaned twice. The second time, most likely you will need to clean the windows with a strip washer and squeegee instead of the water fed pole. A good tip is to learn if the windows you are cleaning have water spots by doing a little cleaning test. This will help you know how to clean the window. For example, if the window is real dirty, the answer could be to clean the surface twice and by testing a little area, you will quickly see if that will be your remedy. If after cleaning, doing the cleaning test, and cleaning the window a second time, it still has water spots, then the window likely has hard water spots. These spots are considered to be hard water damage or hard water stain. If the window is damaged by hard water, then you can do another test to see if the hard water damage or hard water spots are 1st or 2nd stage corrosion. If the glass is not heavily pitted or in 2nd stage corrosion, it can be cleaned by several different biodegradable cleaners and also an acid cleaner. The acid cleaner would have to be tested on each different window to see if it tests clear. For example, if a little of this cleaner is applied to the window surface and it comes back cloudy, then this cleaner cannot be used properly without damaging the window. When the cleaner test cleans clear, then it can be used, but still needs to be tested on each individual window. Here is another tip. Do not think that when you test a window with the cleaning test that you will get the same results since you are testing the same type of window. The window can be turned a different way when manufactured and it will not test or clean the same way as the others in the same home. So, if you are cleaning with any kind of acid cleaner, the windows all must be tested first or you can damage the windows. Another good tip if you are professional window cleaner or window washer and you are using de-ionized water or a water cart, is if you have the wrong jets on you brush even though the brush is a excellent tool, water can come out too fast or spray out to much. This can be a very common cause for water spots.
Related Articles -
Window, windows, window cleaning,
|
