|
There are various kinds of pipe fittings and many components that go into putting together a set of pipes. There are angles and couplings and the actual pipe lengths as well. There are bushes and reducing bushes and in some cases, you will also find a hex nipple fitting. Pipe nipples are generally used to connect plumbing to a water heater or any other plumbing. They are used in the fitting that has straight end hoses or pipes. It is recommended that a combination of pipe nipples be used for suction and discharge service for movement of compatible liquids. A hex Nipple is known for its corrosion-resistant properties, excellent functioning and durability. These are designed to withstand varying flow-pressures and are an important component of pipe fittings. They are available in various dimensions, sizes and materials. They may have varying fitting ends and can also be custom made for certain industrial and heavy-equipment applications. These fittings offer a very strong connect when they are fitted appropriately with pipes. Care should be taken while choosing the pipes and is important to maintain the quality right through the entire structure. These fittings are used across a wide range of industries such as chemical, paper, and cement companies. These are also available in varying thicknesses and diameters. There are several other pieces of equipment and plumbing mechanisms that are used in the chemical and oil industries and valves are required to regulate the flow of the oil, water or chemical. These valves function as a shut-off valve application. There are a few plastic or PVC versions that are manufactured for smaller commercial applications as well as in residential ones. However, in industrial applications there is a distinct need for high-precision valves. In some cases, these valves may be several ft in diameter and are used to regulate the flow of oil and water at dams, drilling sites or even in petroleum factories. In applications such as these, security is of utmost importance and care has to be taken that no one tampers with the equipment. It is at these places that camlocks are used and are a definite requirement. Though camlocks are found largely in industries and factories they can also be put to residential use especially in areas where water or gas valves are out in the open. You can find camlocks that are basic, uncomplicated and inexpensive and then there are the heavy-duty, rugged ones that will cost a great deal more. The locks that you buy will depend on the location that they are going to be fitted in and the application they are going to be used for. Residential equipment need not be very heavy-duty while sturdy locks are a prerequisite in an industry. Apart from this there are safety and quality norms that have to be followed when any components and parts are going to be used in factories. You can order all pipe fittings online. Ensure that you are looking for ones with the right specifications and sizes. Resource box: King Fittings has camlocks for residential and industrial use. Hex nipple are also a kind of pipe fitting.
Related Articles -
Camlocks, Hex nipple,
| 
