Rifle scopes are manufactured with various kinds of technologies. Some are illuminated, non-illuminated while some are tactical or night vision rifle scopes. Zero Stop is a technology that is used in various brands. For instance, the Nightforce F1 scope is packed with Zero Stop technology. The big question is what is it? It is a recurring problem for the users to make radical adjustments to the scope elevation every time you take an aim. Although the adjustment requires you to simply turn two knobs and return to your zero setting but in between a shot, it is difficult to adjust the settings. If you are a professional hunter you know what is being discussed. Going through the entire setting becomes all the more difficult when you are in a low light condition. Thus, several manufacturers have taken up this problem and tried to solve this issue. Hence, you will find Zero Stop ingrained into rifle scopes from Nightforce, Leupold, Schmidt and Bender, Vortex, etc. A Zero Stop scope adjustment mechanism will allow the users to establish the zero point on any given point in the scope range. As far as its mechanism is concerned, there is a T shaped bolt for adjustment that is aligned vertically inside the body in a fixed position. You will find this on the turret of the rifle scope. A tiny threaded central bore is included in the adjustment body. The adjustment bolt is attached to it. There is also an upward cavity with splines in the inside surface. The index dial is disposed longitudinally and it is also locked around the adjustment body and over the threaded upper section of the adjustment bolt. A stop ring is further attached to the threaded upper section which extends till the index dial. You will also find a lock ring that are locked together selectively on the upper section of the adjustment bolt. On the top surface of the index dial a tab element in then formed that is attached by a tongue shaped stop ring. The latter locks the index dial body and stop plate and prevents any downward movement of the stop plates. Longitudinally an outer cap is placed over the adjustment body, stop ring, index dial, and lock ring. There is a locking screw in the outer cap. If you tighten this screw it will force the lock ring to lock the outer cap. While this is all about the mechanism of a Zero Stop, what you need is a brand whose zero stop technology is clean and effective. In this regard, you can opt for the Nightforce F1 scope that has an in-built zero stop technology. if you browse through the reviews, there have been positive responses regarding this model. In fact these models are used by the US military forces as these are exceptionally fast and applicable to a wide range of targets at various distances. So do your research well and take the right pick!
Related Articles -
Nightforce F1 Scope, Nightforce Scopes, Nightforce NXS Scope, Hunting Gear, Hunting Equipment, Rifle scope,
|