|
Changing the floor is one of the best ways you can be remodel your home. It will give your house a traditional feeling and a beautiful look. If you are looking to sell your house in the future, the value of the house will go up with a significant amount. Cork flooring is one of the most preferred designs for homes. You will be extremely delighted when we are done working on your home. Cork Floating Floors Installation in Your Home It is complicated, and you will need to hire professionals. Floating means that the tiles are not secured to the subfloor but on the top. You will need to leave space between the cork tiles and the wall. Another issue usually arises when you want to extend the floating cork floor from one room to another, an expansion gap is necessary to make this possible. If the room you are installing tiles, a moisture vapor is a requirement for cork floating floor installation. A number of surfaces on which you can lay the cork flooring include wood flooring, ceramic floor, and vinyl. What you should consider is the size. It should not exceed eight ft. If the tiles are placed on hard wood floors you will need to lay them across the existing floorboards. There are a number of tools you will need while installing cork floors. Spacers, floating floor cap, rubber mallet, crowbar, tape measure and others. Procedure for Setting up The Planks 1. Start by laying the planks in one of the corners of the rooms. Place the plank away from both walls at the corner. 2. Then you make the first long row flooring in the room. Snap the next plank into the end of the first plank by placing it at an angle. You should not hammer it directly to avoid breaking the planks. 3. After you have finished the first row, you will need to cut the plank. Move it to half an inch away from the wall and mark the back of the plank. 4. The next step is to place the plank to be cut on a surface to cut it. You can use a handsaw to cut the plank. 5. After laying the rows of planks, measure and cut the planks to fit but leave space between the last row of planks and the wall. 6. Make sure you vacuum the dust before you install the sealer coat. Use a soft method to put the coating to avoid missing any spot. This will prevent air bubbles forming in between the planks. 7. Then you have to wait for about 4 hours before you walk with shoes into the room. I can assure you that you will not be disappointed with the finish. The above steps are the basics during a cork floating floor installation. However, it is advisable to get professionals to do the job for you to avoid damaging your floor. For whatever type of cork flooring you want to do in your house, vista remodeling is among the best companies that will help you remake your house. We are experienced in cork floating floor installation and have been in the industry of remodeling for the past decade. Get in contact with us through our number email.
Related Articles -
cork flooring, cork floating floor installation,
| 
