There are many reasons to put in a residential swimming pool, including economic, social, health, and entertainment benefits. However, there is one obvious drawback -- maintenance. Swimming pools require regular cleaning, chemicals, and equipment checks. They must also be emptied when the weather turns cold in some parts of the country, and then refilled when it warms up again. With that said, few homeowners regret the decision to put in a backyard basin. Not only does it increase the value of their properties, it also provides countless hours of family fun. |
What About Leaks?
One of the most common concerns owners have is that little piece of paradise will develop an aperture. They are right to be worried. The average residential model has over twelve hundred square feet of surface area and hundreds of feet of plumbing underneath that. A small crack the size of a pinhead can cause it to lose hundreds of gallons of water each day. Worse yet, the damage is almost impossible for an untrained individual to find. Unless there is an actual crack, which is quite rare, it is unlikely that an owner will be able to locate a leak -- much less repair it.
Like most structural issues, leaks are degenerative. In other words, they tend to get a lot worse and a lot more expensive unless they are repaired as soon as possible. As mentioned earlier, finding the actual damage is unlikely, but there are signs and symptoms that every owner should keep a close eye on. What are they?
The most obvious one is water loss. If your swimming pool loses more than ¼ inch of water in a 24-hour period, a hole or crack is the most likely culprit. Damage can also cause algae to form, even after the water has been treated. A leaky basin will also cause your automatic filler to constantly release more H2O to keep it filled. If you observe any of these issues, call a repair professional for immediate pool service. Ignoring the problem will never make it go away. It will only result in higher repair costs down the road, as well as higher water and chemical bills in the present. What Will They Do?
An experienced pool service professional will generally use two tests to locate the leak. The first is called a pressure test, and it is used to assess the integrity of the plumbing system. Water is put into each line and if the pressure drops it means there is a hole in that line. If the plumbing system is sound, the problem must be in the structure or shell of the pool. If this is the case, a dye test must be performed. How does it work?
After he or she visually identifies possible damage, the pool service technician will squirt a small amount of dye in the area to see if the suspected leak is actually resulting in water loss. If the dye is pulled out of the tub, the damage has been found. This simple and affordable test is highly effective at identifying repair issues in every type of residential model.
Easy to identify and often inexpensive to fix, leaks are no match for an experienced pool service technician.
When looking for pool service Hunterdon County, NJ residents count on Sahara Pools. Learn more at Related Articles -
pool, service, hunterdon, county, nj,