|
When it comes to nails, you might think that a nail is a nail, and any nail can get the job done for whatever project you're trying to complete. But if that's your mindset, you'd be wrong, because different nails can be required for different jobs. If you're working on your roof, for example, that's a much different job than hanging a picture in your living room, and it requires a different nail. Here's what you need to know to do the job right. Prepare for the Weather The most obvious difference between roofing nails in Atlanta and other kinds of nails is the exposure to the elements. When you're hanging a picture in your living room, you don't have to worry about the nail weakening because of heat, rain, humidity, or other problems that being outside can cause. An indoor nail will maintain its structural integrity for a long time because it's completely protected from any outside factors besides the weight of what you're using it to accomplish. That's not the case with an outdoor nail. An outdoor nail is constantly being exposed to whatever the weather can throw at it. It might not snow in Hotlanta, but the humidity in this city can bring its own set of problem. Remember, this is the city with a climate that proved too tough for weathering steel in the days of the Omni and rusted through a metal that was designed not to rust. If the conditions can do that to a large steel roof, they can certainly cause problems for the wrong kind of nail. To avoid that kind of situation, make sure you choose a nail that is designed to withstand the effects of Mother Nature. A nail made out of aluminum isn't going to be strong enough to do the job. You'll need a nail made out of something stronger, such as stainless steel, copper, or zinc to be able to stand up to the elements. If you've got the right nail in place, you won't have to worry when the steam shows up or when a thunderstorm wreaks havoc on your roof. Use the Right Size Your nail needs to be able to get through your shingles, because if it doesn't, it's not going to have any effect. At the same time, you obviously don't want to have a nail that's so long that it sticks up on your roof to prevent it from slicing through it. That's why it's important to choose the right size nail. In general, a nail shank between one and two inches usually does the job. If you're using wooden shingles or another thick material, you might want to increase the shank a little to be certain it can get through. The main thing to remember is that you want the nail to be long enough to go through and not any longer. Choosing roofing nails in Atlanta might seem to be a small thing, but it can be a really important thing as far as preventing any issues with your roof. If you take the time to take care of the small details, the bigger issues will take care of themselves.
Related Articles -
roofing, nails, in, atlanta,
|
