Power strips may help protect your computer equipment from a power surge, but it will not help if your power suddenly goes out completely. A loss of power can bring your business operations to an abrupt halt, which is not only inconvenient, but it can cost lots of money. If you’re seeking to protect your computers with UPS power supply rentals, take into consideration these important questions that will help you rent the right unit. |
Before getting a UPS unit, you should first ask why you need one. The primary use for a UPS power supply is to protect your equipment from brownouts, blackouts, surges and other power flow problems. A sudden shutdown of your computer can cause data to be lost or perhaps even software to be damaged. A UPS unit can continue to supply your computer with enough power to keep it running while you save any recent changes to your files and then shut down your computer in its orderly fashion. In short, any equipment with short term or long term power needs will require UPS power supply rentals.
Next, you should determine how much power you need. Personal desktop computers don’t need much, just a small basic unit is necessary. Other businesses require units that can supply power to multiple computers and devices, typically in office settings. Check the power supply ratings of your devices. Remember, however, that computers don’t operate off the maximum power load. Still, it is good to rent a UPS that can handle the maximum load, as you’ll be getting a device with extended battery life. You can also determine your power needs by looking at the core system and the peripherals attached to it that you wish to keep operating during a power outage. Some devices, like servers, have no peripherals, since the core hardware is the only thing that needs to operate. On the other hand, a computer hard drive also needs a monitor to fully operate it, so UPS power supply rentals should keep both the drive and the monitor running.
Different UPS Units
UPS units come in three basic varieties. The most basic type is a standby UPS unit. The unit will wait for a power outage, then activate its internal battery and supply the attached machine with power long enough for your employees to finish off their work and properly close the machine down. The second type is a line-interactive UPS unit, which comes with power taps on its transformer that can be used during power interruptions or surges, allowing the unit to avoid using the power in its battery unless it’s necessary. Finally, there’s the online UPS unit, which actually isolates your devices by acting as a firewall between the primary power source and the machines attached to it. Power flows into the online unit, which the unit then distributes to the device. In the event of a power outage, the attached devices are completely unaffected, as the online unit will simply continue to supply power from its battery.
By answering these questions, you’re all set to choose wisely among the many Ups Power Supply Rentals that are available, and safeguard your equipment against sudden losses of power.
Related Articles -
UPS, Power, Supply, Rentals,