Installing a fountain is certainly one of the best possible ways to enhance the look of your garden. These wonderful fountains will not just only enable you to enjoy soothing sound but will also make the environment cool. To make sure you are able to enjoy this beauty for a long number of years, it will certainly be wise for you to maintain Outdoor Water Feature Melbourne in an adequate way and even prevent formation of algae on its walls and water delivery system. Below are discussed some of the major ways by which you can easily remove or prevent growth of algae and thereby enhance the look of Water features Melbourne. 1. Clean the fountain quite often This is certainly a smart way to prevent growth of algae on the walls of Outdoor Water Feature installed in your garden. Make sure to disassemble the parts of fountain carefully and then clean its walls with recommended solution. You can use a sponge to adequately scrub the body of fountain and thereby get rid of algae. If you have installed a large fountain on the front yard of your house then make sure to use a vacuum cleaner to get rid of unwanted algae and enhance the look of the beautiful feature. 2. Make sure to change the water of fountain once every month According to studies, it has been found that using stagnant water for more than a month is certainly one of the major reasons behind formation of algae on the walls of Outdoor Water Feature. To get rid of this situation, it will certainly be wise for you to change the water once in a month. If you have installed a small feature then it will be wise for you to use distilled water because this water is free from various types of impurities. 3. Install the fountain on a shaded place It will be wise for you to install Water features in Melbourne in a shaded area because sunlight is one of the major reasons due to which algae grows on the walls of the feature. 4. Make sure to clean the pump adequately The pump is also one of the major equipments that results in growth of algae on the walls of the Water features. You must carefully disassemble the parts of the pump and then clean it adequately. If you are unable to handle this job properly then it will certainly be wise to get the service of a professional person. 5. Use solution to prevent formation of algae Get some advice from reliable suppliers of fountains and Artificial plants Melbourne regarding chemicals that must be used to prevent formation of algae. Make sure to spray the solution according to the prescribed instruction for best results. You can also place Artificial plants around the fountain to give a fresh look. Make sure to clean the fountain adequately to add beauty to your garden in the best possible way. About the Author Craig Hammond is a garden lover and reputed supplier of fountains and Artificial plant pots melbourne. He wants to convey some vital tips to prevent formation of algae on the walls of Outdoor Water Feature Melbourne and Water features Melbourne.
Related Articles -
Water, features, in, Melbourne,
|