|
|
|
|
|
|
Author: yu feng
Company: Zhengzhou Yufeng Heavy Machinery Co., Ltd.
Region: Zhengzhou
Website: www.ballmill88.com
Author Comment / Biography: Clay Professor-level senior engineer of the National Education Commission deputy director of the Building Materials Industry Division Biographical notes:
1962.9 graduated from Nanjing Institute of Technology, assigned to Beijing China Building Materials Academy of Sciences;
The 1962.9-1988.4 China Building Materials Academy of Sciences, served as technicians, engineers, project leader, Research Director, senior engineer, professor-level senior engineer, executive vice president;
1988.4-2006.4 National Building Materials Bureau Policy and Regulation Department, Planning and Development Division and Director of the Office of National brick and building energy efficiency; 2000.6-now senior adviser of the China Building Material Industry Association, the National Education Commission deputy director of the Building Materials Industry Branch, China International Engineering Consulting Company The expert members of the national wall house area of ??the road with the advisory board of the Committee for Standardization of building materials.
Professional Affiliations:
Building materials and products - housing construction materials - wall materials and building energy efficiency; industrial waste utilization - fly ash, coal gangue effective utilization of the production of wall materials; rational use of fly ash production of sintered products, the production of concrete blocks and concrete bricks production of the entire pressure fly ash bricks, aerated concrete and autoclaved fly ash production of fly ash concrete light sheet, research different products to adapt to the different equipment and technology and optimizing production parameters. Of wall materials and construction to promote systems engineering research and practice "," slowly brick road - the arduous trek; editor of "new wall materials Manual" and other books; published in various newspapers and magazines where waste , dozens of articles of the new energy-saving wall materials.
|
Articles by yu feng |
61. After we finished all the previous process, whether the degree
June 12, 2013
After we finished all the previous process, whether the degree of hardening to half of aerated concrete block equipment products body suitable for cutting Autoclave Aerated Concrete block plantin the production p...
|
|
|
62. Aerated concrete block equipment procuring static stop related knowledge
June 12, 2013
Light Weight Block Machinethe electric ferry push into hot chamber machine roof initial curing roombeneficiation plant, the whole process to form a slurry blank cutting must be finished in the initial curing room. The gas stop gas is: slurry in the mold of...
|
|
|
63. Strict requirements must be standardized productsthe device has higher efficiency as the production
June 12, 2013
Strict requirements must be standardized products, as well as in aerated block production process, ensure the management process and method of the production line, which can produce high quality, and meet the specifications of the products. In each block filling equipment manufacturers are also cons...
|
|
|
64. Strict requirements must be standardized products
June 12, 2013
Strict requirements must be standardized products, as well as in aerated block production process, ensure the management process and method of the production line, which can produce high quality, and meet the specifications of the products. In each block filling equipment manufacturers are also cons...
|
|
|
65. Aerated concrete block equipment whether the production process
June 12, 2013
Aerated concrete block equipment whether the production process or the production of raw materials, energy-saving and environment-friendly production line can be known, energy saving and environmental protection guard it as worthy of title. However, no perfect thing
|
|
|
66. Aerated block device to achieve the maximum replacement product dimension time
June 12, 2013
Aerated block device to achieve the maximum replacement product dimension time Aerated block equipment to maximize the reduction product change size time in aerated block cutting machine shaft is provided with a pneumatic tensioningball mill manufact...
|
|
|
67. Slurry thickening equipment aerated concrete block of the matters needing attention
June 12, 2013
Slurry thickening equipment aerated concrete block of the matters needing attention How to block the slurry configuration ofAutoclave Aerated Concrete block plant aerated concrete block equipment production. The...
|
|
|
68. The position of aerated concrete block equipment in embryoid bodies in the mold
June 12, 2013
The position of aerated concrete block equipment in embryoid bodies in the mold In the aerated concrete block production line equipment, mold is an important equipment of aerated concrete block equipment. Design of the die, should choose the most reasonable security position and parting surface acc...
|
|
|
69. Principle analysis of aerated block production line equipment of raw materials
June 12, 2013
Principle analysis of aerated block production line equipment of raw materials in the setting and hardening From the principle point of view, aerated blockbeneficiation plant production line equipment in production can be mainly divided into two stages, the fi...
|
|
|
70. Aerated concrete equipment edges and embryo cutting damage treatment
June 12, 2013
Aerated concrete equipment edges and embryo cutting damage treatment 12 corners of aerated concrete body and each cutting seam 8 corners of formation may be damaged in the process of cutting. Provisions of the national standard of aerated concrete equipment plate,: whosoever shall fall angle size i...
|
|
|
|
|
|
>
|
|
|
|
|
Author Login |
|
|
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|