|
Choosing a floor type is a tedious task. A good floor is supposed to be both attractive and tough. It gives a personality to your place and adds character and style to the way your interiors speak for themselves.Good quality wood floors last for years and years with proper maintenance. Also they become more beautiful with time. Here we give a short brief on wooden floor installations. Wood floor installations, MD Companycould be a wise choice in case you need hardwood floor installations. These flooring are tough and can go through daily wear and tear for long periods of time. Wooden floors do not hold on to dirt and debris, thus it is easy to clean. Wooden flooring adds incredible significance to any space. It is worth mentioning that nothing taps the natural attractiveness of hardwood floors. Wood flooring is as solid as it sounds Solid wood flooring is made from a single piece of timber. It is air dried before sawing. The timber is cut in three ways: flat-sawn, rift-sawn and quarter-sawn. The timber cut as per the required dimensions. It can be packed unfinished for a site-finished installation or finished at the factory. The moisture content at time of manufacturing is carefully controlled to ensure the product doesn't warp during transport and storage. Ways of hard floor installations • Tongue-and-groove: One side and one end of the plank have a groove; the other side and end have a tongue (protruding wood along an edge's centre). The tongue and groove closely fit together. This joins the planks. It is not noticeable once joined. • Click systems: A variety of such systems are found in the market. This type of floor is similar to tongue-and-groove. Instead of fitting directly into the groove, the board is put at astatic angle to create the curved or hooked tongue fit into the altered groove. No adhesive is used. This makes board replacement easier for maintenance. It can also work well with those who believe in Do-It-Yourself. • Floor connection system: Many types of connection systems are available to choose from. The main principle is to have grooves on all four sides of the plank, a piece that is inserted into the grooves of two planks to join them. The piece used for the connections can be made of wood, rubber, or plastic. This installation system allows different materials (i.e. wood and metal) to be put together if they have the same connection system. Wood floor installations, MD companies generally use these types of methods to manufacture their goods. • Glue-down method: This is popularly used method for solid hardwood floor installationson concrete sub-floors. A layer of mastic is placed onto the sub-floor using a trowel. The wood pieces are then laid on top of the glue and hammered into place using a rubber mallet and a protected 2x4 to create a level floor. Many times this kind a floor will need sanding and re-finishing. Finishing and sanding A properly finished and sanded floor is necessary for the complete look. Sanding takes care of any unevenness of the subfloor. Also sanding is used to renew the appearance of older floors. Vacuuming, sweeping, and damp mopping is all you need to maintain the beauty of wooden floors. Oil soaps should be avoided. We need not mention that hardwood floor installations are best for the beautification of any type of house. Additionally, such floorings require less maintenance and look shining as long as cleaned properly. So why not choose Wood floor installations, Maryland companies for the benefit of getting excellent wooden flooring at competitive prices.
Related Articles -
Wood floor installations, MD, hardwood floor installations, ,
| 
