Drywall is vulnerable to water damage. Your home's drywall can get wet in a variety of ways. Often times pipes that run behind them can burst or spring a leak. Water damaged drywall can be a very serious problem. Not only that it will make the drywall look ugly, but it can also weaken it and develop molds, which can cause serious health problems. |
There is one rule of thumb that you need to keep in mind when it comes to wet drywall. There is a point of no return. If, after your drywall has dried, it continues to sag or warp, then you will need to replace that drywall. In essence, the structural integrity is permanently damaged. However, depending on the degree to which your drywall is damaged, it is possible to dry it out and save it.
If you have a water damaged drywall, then it is very likely that you have leaks in your home caused by flooding or piping leaks. It can also be caused by leaks on your roof.
It is very important that you get this kind of problem repaired immediately. So, just what can you do in order for you to fix water-damaged drywall?
First of all, you have to remember that you need to know where the leak is coming from. You have to make sure that you fix the leak first before you continue on in fixing the drywall. Besides, nothing can be more frustrating than having the drywall fixed only to get it water damaged again by the same leak.
You have to keep in mind that in most cases, the leak will not really come from the wall but it can come from the ceiling where the water can travel down to the damaged part of the wall. So, try to look closely for clues as to where the water came from and get the leak fixed first before you continue on with the repairs for the water damaged drywall. Using Fans To Dry Out Wet Drywall
As with any water damage restoration or flooding situation, you want to create as much air circulation in the affected room as possible. If you can, open doors and windows. If you have a ceiling fan, turn it on. It's also good to get a couple of box fans blowing directly on your wet drywall immediately. Remember, when it comes to controlling water damage in your home, reaction time is critical. If you choose to call a professional flood restoration company, be sure to choose one who guarantees that they will be there within an hour or less. That way you know that you're giving yourself the best shot at saving your property. Wet drywall is no different. So begin by setting up those fans and increasing circulation in the room. Blotting With Dry Towels
After setting up the fans and increasing air circulation, you might want to try dry blotting the walls. But do so carefully. Because wet drywall is already more weaker than normal, even a small amount of pressure can cause you to punch a hole through it. So, if you choose to blot dry the drywall, do it gently, applying pressure along all affected areas. Use less pressure as you move away from the baseboards and where they drywall intersects with the ceiling. It's stronger in those areas.
Further Measures For Wet Drywall
If you're really handy and you know what you're doing around the house, you can remove the ceiling sheetrock. This will expedite the drying process and make it more thorough as well. However, the reality of this situation is:
If the drywall is so wet that you have to remove the ceiling sheetrock, it is most likely beyond repair. Drywall can absorb only so much water. You will be able to tell easily if your wet drywall is a lost cause.
Go to main page Flood Restoration Auckland for best assistance on the job
Related Articles -
Flood, floods, flooded, flood restoration Auckland, carpet dryer, dehumidifier, carpet drying, water damage restoration Auckland, flood restorations,