Population growth and the ever-changing way of life means that we use about 55% more water than we did 25 years ago. As a result, we are increasing pressure on our water resources and at the same time does not meet the needs of businesses, schools, hospitals and commercial facilities in the money that could be used elsewhere. The design of the content of the toilet water saving initiatives are significant savings to be made. Eco-toilets (UK) collected the following information to help our clients learn how to: Toilet / Tanks: Saving Water Tanks - the regulations in force flush the toilet for up to 6 liters. However, more than 60% of the UK bath set yet tank, the flash 7.5, 9, 11 or 13 liters. Installation of 6-liter toilet tank, and can be stored in any of the 20% to 50% of water per year. In addition, the 4.5 liter tanks are now available at an additional means of water can be saved. Dual flush - Because you do not always need a full flush every time you go to the toilet, Dual Flush cisterns provide the opportunity to deliver two flushing options. A small button delivers 4 liters per flush, big button is 6 liters per color for a long time. Delay cistern - This technology prevents the toilet cistern water before the water is ready, does not guarantee any extra water down the drain. This is especially suitable for high-pressure situations. Urinal: Waterless Urinals - waterless urinals to achieve 100% water savings compared to a traditional tank option for the Fed. Only one waterless urinal can save over 87,000 gallons of water per year. In addition to the obvious advantage of water-saving advantages are: - Do not Ease of maintenance - no leaks and piping. - Children under the rubble - there is no water, the mixture of urine does not mean uric acid, resulting in a jam. Urinal flush control - leave a drip urinal and wash the tank to do it about every 3-4 minutes, resulting in a significant loss of water, especially in low-toilet use. Rinse Control has been developed to reduce the time flushing is activated. This may cause redness or urinals after each use or every 30 minutes, depending on your preference. Straight Flush - flush valve is installed in a commercial toilet fed directly to the power grid, and means that there is no need for the container. This object allows the manager to specify in advance the amount of water passing of the genitourinary system. Ideal for heavy use of the toilet, in particular, public toilets, airports, pubs, etc. Taps Self-closing valves - Self-closing faucets, also known as Non-concussive taps can be set to operate for a predetermined time - usually 10-15 seconds. This is achieved during installation. The valves are not left to chance, and to ensure the toilets are flooded. Ideal for schools and applications, such as airports. Automatic sensor faucets - run from the mains or a removable battery infrared motion sensor to open and close the solenoid valve, which starts and stops the flow of water. This means the delivery of the water flow at the right time with minimal loss of liquid. Brain Sharon is experienced and writes articles on Bactericidal Gym Wipes, Washroom Supplies, Commercial Cleaning Products, Effective Cleaning Products, Clover Chemicals, Commercial Janitorial Supplies, Pool Cleaning Chemicals, Commercial Cleaning Supplies, Industrial Cleaning Supplies, Professional Cleaning Supplies and Specialist Leisure Supplies etc.
Related Articles -
Bactericidal Gym Wipes, Washroom Supplies, Commercial Cleaning Products, Effective Cleaning Products,
|