The introduction of arc-shaped column aluminum veneer: The arc-shaped column aluminum panels is mainly made of high-grade aluminum alloy, and has been cut, folded, curved, welded, reinforced, polished, sprayed and other processes. Process the finished metal curtain wall products. |
Aluminum veneer is a main choice for building exterior wall decoration. Compared with porcelain, glass, aluminum composite panel, honeycomb panel, marble and other exterior materials, it has a broad development space due to its unique advantages. It is customarily classified as aluminum curtain wall panel products. Aluminum curtain wall panels can be subdivided into three typical products: single-layer panels, aluminum-plastic composite panels, and aluminum honeycomb panels, which can be selected according to specific requirements. Features of curved-column aluminum panels: 1. The curved aluminum veneer has the characteristics of light weight, high strength, good rigidity and easy processing.
2. As the surface coating has chosen fluorocarbon coating, it has weather resistance and UV resistance, long-term color and gloss, good corrosion resistance, and can be used under harsh conditions of -50?-80?. 3. Good acid and alkali resistance. At present, fluorocarbon coatings are coatings with different outdoor performance. 4. Excellent processing performance, easy to cut, weld, and bend, can be shaped and easy to install on site, which is unmatched by other decorative materials. 5. Good sound insulation and shock absorption performance, and can punch holes on the aluminum veneer at will, or add sound-absorbing cotton, rock wool and other sound-absorbing and heat-insulating materials on the back, which has good flame retardancy and produces smoke when a fire occurs. 6, Easy to clean, convenient, and meet environmental protection requirements. three. The specifications of the arc-clad aluminum veneer: the thickness of the outdoor arc-clad aluminum veneer is generally 2.5mm, 3mm; the thickness of the low-rise and podium can be 2.0mm, and the indoor wall and ceiling can be 1.0mm or 1.5. mm.
The general size of the aluminum veneer can be selected by the customer, and the width after unfolding is generally not more than 1800mm. Material: Mainly choose 1100 series or 3003 series aluminum alloy sheet, which is formed by bending, welding, grooved reinforcing ribs on the back, and riveting corners around it. Product color: The color can be widely selected, the color is beautiful, and it can be selected at will.
Related Articles -