|
With just some simple hand and power tools, and just a few minutes a day, a week, or a month – depending on how much you’re using your machine – you can help keep your mechanical appliance running smoothly for years. The majority of industrial machinery problems that most mechanics encounter can be traced to poor general maintenance or neglect. But with just a few simple hand and power tools, and just a few minutes daily, weekly, or monthly – depending on how much you’re using it for production – you can help keep your machine running smoothly. Here are a few guidelines for care that should keep you and your machine well-maintained and out of the repair shop. Machine maintenance tools Thoroughly cleaning and caring for your industrial machinery requires only a few simple tools available from your machine dealer or specialty store: a few brushes, a can of ozone-friendly compressed air, a clean piece of muslin, industrial-grade motor oil, and a dust cover. Keep it covered with the right machine guarding. Grime, dust, and grease can find their way into your machine and cause all sorts of problems, especially for the main electrical circuit board of an automated machine. So try not to place it near an open window or any opening, and always cover it with the machine guard when not in use. Machine guards are ideally customized to fit the all dimensions properly. In addition, you can purchase a ready-made thick plastic cover from a notions or machine dealer, make one yourself, or even use old blankets. Be sure to keep your industrial machine under wraps when you’re not using it. During machine maintenance, it is highly recommended to replace all parts that are worn-out, or after every three months of operating time. When you use your machine, every single part of it works in a unique manner. Because of this, some parts may need to be changed earlier than others. So if a piece needs to be changed, you might as well replace the other parts that may affect the overall functioning of the machinery. Keep in mind that poor maintenance work may lead to more machine repairs. Adelaide, for instance, has industrial machine maintenance workers who also give invaluable advice regarding the choice for the most compatible parts and what raw materials to use best. A common mistake is to use parts that are too ill-fitted for the machine. For example, a 70 mm motor belt is the right choice for smaller, more compact machineries, but some may use a size 60 or 65 mm belt. Be sure no internal components of your machinery are exposed. Aside from causing potential injuries, exposed parts can jam the machine and cause the other parts to break. And note that there’s no such thing as a generic part. Always use parts that are designed for your machine in order to avoid glitches and breakdowns, as well as permanent damage to your machine. Get in the habit of cleaning your machine after each project to take Machine Maintenance to the next level. For more info, please click here.
Related Articles -
machine safety guards, machinery adelaide, machinery repairs, adelaide, robotic system installations adelaide,
|
