In a multi-joint cigarette packaging printing process, due to objective factors often led to different degrees of paper printed product distortion. The deformation of the printed paper products at the cutting, often appears on the machine right after the re-production of cutting-bit version of the issue die. This gives great shape after the cutting process more difficult, much lower passing rate of finished products. Adjustable Die
activities that products based on multi-joint deformation packets, printed materials in the appropriate place in the direction of deformation increases row pole cutting bit to form a separate unit of around or about; die in pole position installed between the regulator, when cutting deformation under the direction of printing materials to adjust.
Activities to make everyone die-adjustable (hereinafter referred to activities of Science) have a better understanding, the following version of its comparison with the wood cutting to illustrate.
1. Activities with common wood cutting edition version of the costs and benefits
Plate Fee: Make a normal version of the cost of wood cutting 6,750 yuan, a crease line needed for 480 yuan.
Activities produced a version of the cost of 80,000 yuan.
New editions of textbooks: Deformation due to the paper, a printed piece may need to make 2 to 3 version of ordinary wood cutting.
Activities deformed version of the paper can be adjusted without re-plate.
2. Loading, school version of the time and life
Equipment, school version of the time: Die-loading commonly used wood for 4 hours, for an indentation line Xuyong 1.5 hours.
Activities version by the end of block steel mold plate loading time was 2.5 hours, without changing lines.
Life: Common wood die-cutting knife can be changed three times, imprint 1.5 million times; indentation line 150 000 times in the molding for the first time.
Activities are available for 20 to 25 times for die-cutting knife, imprint 15 million ~ 20 million times; indentation line permanent use.
3. Molding effect and intangible benefits
Molding effect: Common wood die-indentation with the severity of inconsistency, deviation, and explosive line indentation phenomena, forming unstable results.
Activities, full version of indentation lines, creases standard deviation and the explosion occurred line indentation can be adjusted when, forming effective.
Intangible benefits: Die wood used in product quality, often indentation deviation problems, finished passing rate is low.
Activity Edition deformation according to the paper adjust indentation will not appear deviation, product qualified rate.
4. Actual cost In two version of Die 15 million calculated at the same time, the actual cost as shown in Table 1.
5. Financial budget, cost data
Per work order (24 Union) Each activity Edition Die 15 million calculations, the cost savings of 64,340 yuan plate, die-cut wood more commonly used in revision, change lines, tool change time of 220 hours, greatly increasing productivity . Orders according to company products, white card "Lanzhou" by 15 million / year, "Ocean" by 15 million / year, fine and ordinary "birds" by 15 million / year, by conservative estimate, to be done 4 Die Adjustable activities, annual cost savings of plate about 26 million, saving production time and 880 hours. I am a professional writer from China Crafts Suppliers, which contains a great deal of information about bonsai maple trees , pachira macrocarpa, welcome to visit!
Related Articles -
bonsai maple trees, pachira macrocarpa,
|
