|
There are many different tools and equipment that construction workers and wood workers use. Of these tools the most used tool is that of the hand saw. This versatile tool may seem primitive in comparison to the more sophisticated electrical tools but it is capable of cutting the items and materials you need. Now while these hand saws are capable of cutting into just about any surface there are different saws that are more suited for different tasks. You should take these saws and their capabilities into thought when you are choosing a saw to buy or use for the task at hand. You will also need to see if the hand saws you are looking through have all of the requirements which are part of the make-up of these hand saws. These requirements are basically the rake, pitch and set measurements of the hand saws. Based on the three qualities of which can be found in different hand saws you will get an idea of whether the saw you are choosing is suitable to use or if you should look at another type of hand saw. The way these three qualities affect the use of the saw is easily explained. The pitch of the saw for instance is merely a measurement of saw teeth you will find per inch on the blade of the saw. The rake is looked at to see the angle that the saw teeth have been ground. The set measurement on the other hand examines the way the saw teeth have been set. These teeth are placed in different ways in various types of hand saws. Having covered these details we should take a brief look at the different types of hand saws that you can use. Remember that some of these saws are more suited for certain tasks than others. The back saw is one of the hand saws. This saw has a rectangular blade. The similar types of saws to this one are dovetail, veneer, miter box and razor hand saws. There is a reinforcing rib that is found along the back edge of the blade. Many of us have at one time or another used a Hack saw. This hand saw is used primarily for cutting through metal. You can however cut other materials with these handy hand saws. You will need to take care when you are using this kind of saw as if the blade gets broken you will need to replace the blade. You should also need to finish the cut from the other side. The final of the hand saws to be looked at is that of a Fret saw or it is also called a Coping saw. These saws are ideal for cutting intricate designs. This saw can be rotated a full 360 degrees. This allows you to negotiate tight corners in the wood unlike other saws. The hand saws we have seen are excellent for different uses. Choose your hand saws with care. Muna wa Wanjiru is a Web Administrator and Has Been Researching and Reporting on Saws for Years. For More Information on Hand Saws, Visit His Site at Hand Saws
Related Articles -
Hand, Saws,
| 
