While some homeowners prefer to depend upon a professional plumber in Aurora, CO, others are skilled and equipped to do the job themselves. Some homeowners can install a shower and bathtub especially if the plumbing is already in place. It must be stressed that this project should not be attempted by inexperienced do-it-yourself homeowners. Before deciding to take on this task, make sure that you have some assistance. Bathtubs are big and can be heavy to move on your own. Your flooring must also be strong as a bathtub full of water is rather heavy to support. You should find someone who has experience to help you with this type of work. You can speak to do-it-yourself stores to see if they can refer you to someone. Your brand new store-bought bathtub will have a protective layer on it that should only be removed once you have completed all the installation work. Whirlpool and other electrical type baths will require a GFCI wall outlet. This type of outlet has a ground fault interrupter so that power is interrupted immediately if a problem arises. You should be aware of these things before commencing any work. It is better yet to find a professional plumber to do this type of installation. Some of the tools and equipment that you will require include a ceramic calculator, projects service guide, a virtual decorator and a material list. Thereafter you can begin by preparing the site and installing the supports. That is the simple part of the installation. If the job becomes too daunting, then you must call a plumber in Aurora, CO, sooner rather than later. If not then you can install the strainer and overflow. At this point you will have completed the project and you should be able to finish the wall by tiling or cementing and painting it. Be sure to test the plumbing before working on finishing the wall.
Related Articles -
plumber, Aurora, CO,
|