Regular care is key when it comes to maintaining the appearance and life of your carpet. Routine vacuuming, acting quickly when a spill occurs, and cleaning your carpets, whether yourself or professionally, can determine how long your carpet will stay looking terrific and how long it will last. The amount of cleaning that carpet will require is based on how much traffic the carpet receives, the type of carpet it is and the environmental conditions the carpet endures. Always vacuum well before applying spot removers or other cleaners. Vacuuming pulls up surface dirt and prepares the carpet for cleaning. Also, if you are unsure of how your carpet will react to a certain cleaner, try a little on a small, hidden space to check for colorfastness before using the cleaner on your entire area. Most carpet cleaning solutions have a warning on the bottle about whether it can remove color from the carpet, so be sure to read the label before you use it. Berber carpet, which is constructed from leftover strands of other carpet during the milling process, can be one of the most difficult to clean. However, using cleaners that contain oxygen or peroxide seem to work the most effectively. Pre-treat heavy stains first. Then, spray the rest of the carpet, wait five minutes and use the hot water extraction method to clean the carpet. Increase the water temperature (very hot) when cleaning Berber carpet for the best results. Shag carpets respond well to the hot water extraction method also. By using a mixture of hot tap water and a non-foaming detergent, the water is forced into the carpet pile under pressure. As a result, the ground-in dirt is loosened and the moisture and dirt are then extracted. Always pre-treat stains prior to cleaning the entire space. For those who prefer to use green-friendly cleaning solutions, there are many companies from which to choose who offer plant-based cleaning solutions instead of chemical-based cleaners. Many types of carpets respond to spot cleaning with a simple solution of equal parts of white vinegar and water. (As mentioned previously, always test a hidden area of carpet prior to using it on the entire carpet.) Spray the solution onto stains and then, using warm soapy water, sponge it up a few minutes later. Stains that seem to hold on might benefit from a paste made from salt, borax and vinegar which would sit on the stain overnight. Vacuum it up the next morning and find the stain has disappeared. Bleach should never be used on any type of carpet for cleaning stains, as it will leave a discoloration in the area it was used. Make sure to read the label on any cleaner to make sure you are targeting the type of stains you want to remove. As soon as a spill or stain occurs, attend to it immediately. Blot it only with a clean white cloth or white paper towel. Never rub at the spill or stain, or else it may spread to surrounding carpet fibers. Club soda works effectively to remove red wine stains. Use an ice cube to harden candle wax or gum in carpet, scrape off, and then clean as you would any other spot. If you have a greasy stain on the carpet, sprinkle it with baking soda, corn meal or corn starch and let it sit overnight. Vacuum the affected area in the morning. Proper care of your carpets, whether they are Berber, shag, commercial grade or otherwise, will extend your carpet’s life and keep them looking great at the same time. Do not be afraid to use a professional carpet cleaner, since they have access to cleaning solutions that are typically not available to the general public, and they have much more experience in cleaning carpets and removing carpet stains than you do, and so can be very much worth the expense to get your carpet looking new again. For more insights and additional information about Carpet Cleaning Carpet Cleaner please visit our web site at http://www.cleaning-carpet-tips.com
Related Articles -
carpet cleaner, carpet cleaning,
|