Sand making plant Advantages: 1. The sand making plant integrates three crushing modes, and can continuously work for 720 hours. 2. Higher crushing chamber, greater crushing impact and is excellent sand gravel plant. 3. During the parts and material procurement, production and processing, the quality is strictly controlled. Wearing parts is optimally allocated for longer service life. 4. Hydraulic autonomous system: convenient maintenance, high performance, low failure rate. 5. The whole frame adopts elastic reinforcement technology, eliminating the problems like easy fracture of motor frame. Product Description: |
A sand making machine, also known as sand maker, is mainly composed of upper cover, cylinder, impeller, rotor etc. Xuanshi VSIX vertical shaft impact crusher is newly-designed on the basis of advanced sand making technology of Germany and America. Compared with VSI sand making machine, it has higher reduction ratio, improved capacity and lower power consumption.
Materials vertically fall into the rotating impeller, and under the influence of centrifugal force, the materials collide with the materials distributed around the impeller. After the collision, the materials will also impact with the vortex between the impeller and casing until they are crushed. Through recycled broken system, the particles with satisfactory size will be discharged from the lower part of the machine.
The Whole PCL certical impact crusher including feed hopper, classifier, whirl pool cacity, impeller, main bearing assembly base, transmission device and motor etc. Operating pinciple is as follows: the materials enter the crusher through feeder hopper, which is divided into two parts, one part through the middle of classifier entering into the rotating impeller at high speed, then accelerated, whose speed can reach hundreds of acceleration, then is shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around classifier, then impact on the whirlpool cavity’s scaleboard together, then will be rebounded and impact on the top of the whirlpool cavity, then changs its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crusher, milled twice or more times in the whirlpool cavity, then crushed matetials will be excluded through the bottom discharginghole. This can from a closed circulation through the circular classifier system; in general, materials can be crushed into 20 mesh through thrice circulation. Airflow self-circulation in the whirlpool cavity can eliminate the dust pollution well.
Related Articles -
sand making plant, gravel sand plant, crusher,