|
Grease traps are mandatory by sanitation authorities and food service departments to prevent grease, fat, oil, wax or debris from getting into the public drain system. These greasy matters are source of obstruction in the sewer system specially the public drain, which causes overflows. The putting up of grease traps is considered a means to split greasy things from waste liquid so it would be easy and convenient to remove before they pass to the drain system. Just like a septic tank, the grease trap gathers grease solids and stops them from clogging or blocking the drainage system. Eventually, these grease solids build up in the base of the trap as they split from the lighter material. It is basically imperative that these solid materials be pumped out by grease trap pumping regularly to avoid any drain clogs and pipeline blockage. Proper grease trap pumping of the grease trap and drains lessen the quantity of solid and greasy matters entering to the public drain system thus it helps minimize the possibility of clogs and blockages. Most of the health and sanitation department of towns, cities and municipalities entails regular grease traps pumping and maintenance and check up for individual businesses specifically food and restaurants. The reason behind this mandate is that the oils and grease that are not trapped in the waste liquid reduces the competence of the duct pipe in due time and in the long run can result to pipe clog. Pipeline system with no grease traps requires frequent cleaning more frequently; most likely some pipelines may easily wear out and must have to be changed faster as expected. Too much smears or grease can also cause an overload when sent in the wastewater treatment plant; and may go beyond its tolerable release maximum. It is important to keep in mind that running a very hot water down the sewer may just worsen the problem. There are some ways to maintain a grease trap and dispose the wastes. However, one best way is to contact and hire a professional grease trap pumping service to eliminate the ravage from the grease trap and dispose it properly. There are grease trap pumping service facilities in some areas that specialize in grease traps, sand traps, and septic tanks clearing and maintenance. In grease trap pumping, vacuum pumping trucks are used with high powered pumps that take out all solid and grease contents from the grease trap. Then they use of a high pressure washers to clean and deodorize each tank. To be able to have efficient working grease trap, there must be proper grease trap maintenance to be done and observe. Many troubles can transpire if the intensity of collected FOG (fats, oils and grease) and other solid matters are not being checked regularly; drain line blockages and overflow and clogs can create foul odors that would cause air contamination. For your grease traps to work properly it must be regularly checked and maintained by competent and skilled technicians. More so, restaurants, caterers, school cafeterias and other commercial cooking facilities must keep away from releasing their FOG to wastewater that enters the public sewer facilities. Grease trap pumping NJ
Related Articles -
grease, trap, pumping,
|
