Ultrafine mill starts new superior powder times XZM Ultrafine mill is widely used in making fine powder or micro powder, a new kind of machine for producing fineness and ultra-powder. grinding mill is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished production can be adjusted between 325-2500 mesh.
This Mining ball mill is made up of feeding part, discharging part, gyre part, transmission part (transmission part includes reducer, small transmission gear, generator and electrical control) and so on. It enjoys features like good abrasive resistance, stable and reliable operation.Inner structure of the Mining ball mill is made up of lining plate, grate plate, diaphragm, feeding and discharging devices. The lining plate is used to protect the tank body in order to avoid the impact and abrasion from materials. Different types of lining plates can be used to adjust the movement of materials. Our lining plates are provided by Luoyang anti-abrasion academe and have a large share in the global market with their fine design.
XZM Ultrafine Mill Working Principle
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of roller which are rolling in the ring, and are driven by dial through plunger, After being crushed by hammer crusher, the big materials become small size ones and they are sent to storage bin by elevator. The electromagnetic vibrating feeder will send them to the middle of first dial evenly, the materials will be driven to the edge of dial by centrifugal force, and descended, crushed and grinded by rollers. Then the materials will descend into the second and third ring, and crushed and ground. The high pressure centrifugal blower will inhale air from the outside and blow the materials which are ground in the third ring to powder classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground, white the fineness will mix with the air and be drawn to the cyclone and be discharged from the discharge valve which is in the bottom 01 II. The air which mixed with very little fineness will be purified by impulse duster and discharged by blower and muffler.
Ultrafine Mill Features:
1. Reliable
2. High capacity and low cost
3. Easy adjustment of product fineness
4. Clean, environmental protection s
Related Articles -
jaw crusher, business,
|
