Diverse controls are needed just to have a remote control helicopter take off and land in a different spot. Generally, someone does not need to go into the deep since of how the controls and wings operate but someone has a better shot at learning how to fly them if he understands the dynamics involved in radio control of the toys. First of all, it is important to not that the wireless communication between the helicopter and the hand held controller is only possible because there is a channel through which the two devices can communicate if there is a frequency. It is good to know what each movement on the stick can do, in that each channel has a specific message that has to be sent to the flying device. The main movement is determined by the collective pitch or the throttle. This is usually done by one stick but applicable through two channels. Usually, it is allocated the left stick in case it is a mode 2 radio being used. This same stick therefore controls both the amount of power (throttle) that someone can feed to the helicopter during play time. The only reason it is possible to have both controls working on one stick is because of them being applied through different channels. Therefore, they each give a different output to the receiver. The two channels are referred to as the output channel and the auxiliary channel. The benefit of having two signals coming through different channels is that it allows people to ‘lock’ the speed or throttle at one level. Having too many controls scares away children If the throttle is locked at a reasonable and preset value, someone can focus on other signals or instructions. That means that someone can quickly move into low speed or idle. It makes the realtime operation of the remote control helicopter simpler because if each force was to be controlled concurrently, there would be a lot of confusion, making flying the RC chopper very difficult for children. It would kill the interest before the children grasp the basics of helicopter simulation. It is hard to get a child to use a separate stick to operate the main rotors while still effectively lowering the engine power down using another stick, making the throttle hold a very worthwhile feature for safe flying of a remote control helicopter. Idle controls are very important in flying. Being able to do advanced acrobatic movements excite the kids even more, yet they are almost impossible without full collective control. They help where flexibility and agility is needed, and to make that even more possible, there is a toggle switch to allow easy flipping during control. Mastery is a good ingredient after all because when flying a simple remote control helicopter, there may not be all the time in the world to look at what the hands are doing and still monitor the flight of the chopper. Someone has to learn how to fly the plane with his eyes mostly centered on the chopper and its trajectory. Hobby-eStore is your one stop shop for all things remote control helicopter. Learn more at www.hobby-estore.com.
Related Articles -
remote control helicopter, rc helicopter,
|