|
The key job of carpet cleaning is to remove soils from carpets. The installation of effective matting can help keep soiling to a minimum in all of these areas. There are actually several different types of soils and contaminants found in carpets, and knowing what type of soil is in the carpet is frequently the first step in effectively removing it. If carpets in your home have recently been contaminated with any filth, you may be curious about how to remove dirt from carpet. Fortunately, there are a number of simple and effective ways to make your carpet dirt-free in no time. The following are the top ten soils most often encountered in carpets: 1. Sand, clay, and other "gritty" materials 2. Natural fibers such as lint from clothing 3. Gum 4. Petroleum, oil, and grease 5. Human hair and skin 6. Dust mites, fleas, and other insects 7. Organic soils and materials (minerals and soils from landscaping areas, for example) 8. Airborne carbon and automotive exhaust 9. Spilled food or beverages 10. So-called "miscellaneous unknowns" Fortunately, they can usually be removed using a hot-water carpet extractor…protecting the health and life of the carpet." Cleaning experts agree that it is more beneficial and effective to clean carpeting using hot-water extraction. Hot-water extraction--in which the cleaning solution is heated to approximately 212ºF--deep cleans carpeting. In this method, cleaning agents are typically sprayed on the carpets before cleaning. After the chemicals are allowed a few minutes of "dwell time" to sit on the carpet, the extractor is used to flush out and remove soils and moisture. It is always advisable to vacuum carpeting before performing extraction. This improves the effectiveness of the extractor and reduces the amount of time necessary to clean the carpets. New technologies have made wands far more effective at moisture removal than systems available years ago. The newer options are easier for cleaning professionals to use and reduce the stress and strain often associated with carpet cleaning. Making carpet cleaning greener, more sustainable and more environmentally friendly goes far beyond choosing green cleaning chemicals. In fact, truly greening carpet cleaning will require a group effort involving chemical and equipment manufacturers, as well as end users. But regardless of who gets involved, the goal is the same: quality carpet care that protects the environment and the health of building occupants. Hot water extraction carpet is the choice of over 90% of professional cleaners today as their primary method of cleaning carpeting. Hot water extraction carpet cleaning is effective at removing all types of carpet soiling. Through the use of a wide variety of cleaning solutions, a wide variety of chemistry exists to assist in the break down and physical removal of water soluble soiling such as sugar, food, beverages, and salt. Secondly, dry solvent soluble soiling such as oil, grease, tar, body oils, cooking oils, and cosmetics are broken down, dislodged, and dissolved by organic and natural citrus solvents in the preconditioning phase of hot water extraction cleaning.Please be guided in a more detailed information on this treatment of carpet check out our page here:Steam Carpet Cleaning Auckland
Related Articles -
Carpet cleaning, carpet cleaning Auckland, carpet cleaning northshore, carpet cleaning west auckland, carpet cleaning south Auckland, carpet cleaning,
| 
