|
Alloy wheels always have great look when they are brand new, but after years of continued use, they begin to look terrible. However, with the right tools and technique, alloy wheels can be restored in just a weekend, thereby making your car look much better in the process. Helo wheels are a product of alloy which is a high quality material that enhances their efficiency and durability. With proper maintainace you can easily ensure that you restore the stunning look of your wheels even if they have been in use for decades. Here are five simple steps you can follow to restore the original look your alloy wheels: • Loosen up the lug nuts, ensure the car is raised then remove the wheels.Clean the wheels using a mild detergent, wheel cleaner and warm water. Ensure that the debris is properly cleaned to remove all the grease and then properly rinse them with a power washer. • Use Jasco paint remover or any other paint with the same abilities to remove the previous paint. Apply it on the wheels and allow it last for 10 to15 minutes then wipe it off. You can use steel wool to remove any stubborn stains which do not come off easily. Keenly inspect the wheels for scratches or road rush, and use Bondo paste for bigger scratches. • Allow the Bondo paste to dry up then using a sand paper, rub off the surface until it feels and looks smooth. Wipe the wheel using mineral spirits ensuring that it is clean and free of oil, to make it ready for painting. • Spray a light layer of dusting primer on the wheel and allow it dry for a minute. Repeat the same in two to four intervals. After completion, inspect the wheel again for any scratches and apply putty and the let it dry. When the primer is completely dried up roughly an hour or two dust it with a color coat, allow it to dry and then apply 2 to for 4 solid layers-and after the last coat wet sand it up to 1500 grit. • Finally, spray a clear coat and allow it to last overnight before applying the clear coat. Apply 2-4 coats the same way you applied the primer and the color coat. Let it dry up then use wax to buff the wheels to get a perfect shine. For the enthusiasts of helo wheels these simple steps will ensure that your wheels turn heads in the highways and in the parking lots for years to come alongside retaining the brand new look. So you do not have to worry about them detracting from the appearance of the whole vehicle. Mayer is an expert writer with keen interest on exhaust systems and motors.
Related Articles -
Helo, Helo wheels, performance, tires, wheel,
| 
