Core shooters have come to be known for their high level of sturdiness and ruggedness. Core Shooters for Cold Box Processes is the main procedure used for operating them. The main benefit of this process is the speed it provides for curing quality cores and for stripping them from the machine. These machines are provided with PLC controls and all the operative cycles are programmed with the help of adjustable timers and started with the press of a button. The purposes can also be set through manual operation. Here each and every stage in the cycle can be selected from the control panel. |
Variety of Core Shooters for Cold Box Processes
You can find Core Shooters for Cold Box Processes to suit to any type of gas-hardened system. You can find different types of cold box core shooters ranging from 2.5 liters to 120 liters along with all types moulding machines and shell core shooters. Core shooters can also be found for Silicate CO2 and hot box. The dry air and energy efficient gas generators can be used along with highly accurate liquid gas dose systems to ensure that the cores get made at a steady and economic rate.
Core Shooters for Cold Box Processes Features
Then, you can find Core Shooters for Cold Box Processes having a wide range of ‘no-bake’ features. In this case, there is no need for pollution control or gas hardening systems. The various available options include hydraulic and pneumatic, integral PLC panel featuring operator interface, horizontal or vertically joined boxes, insert head for facilitating shoot plate changeover, integral gas generator for methyl, amine, CO2 and Formate, vacuum clamping, ejection on the slide for the horizontally fixed boxes, automatic core box identification with micro-chip and much more.
Single Station Horizontal/Vertical Core Shooters for Cold Box Processes
These Core Shooters for Cold Box Processes can shoot volumes ranging between 5 kg to 100 kg. These shooters have an average machine time starting from 60 seconds but it excludes gassing, shooting and exhaust. They have the features of hydraulic and pneumatic clamping, and there is the option of segmenting the core boxes horizontally and vertically. The operations can be managed with an Electric Timer, and the unit can work efficiently with power input ranging between 2 kW and 10 kW.
Three Station Horizontal Rotary Cold or Hot Core Shooters for Cold Box Processes
This is another type of Core Shooters for Cold Box Processes that can shoot in volumes ranging between 5 kg and 20 kg. The average machine time after excluding the time required for gassing, shooting and the exhaust starts from 10 second. You can use hydraulic or pneumatic methods for clamping. In this case, the processes for gassing, opening and shooting take place simultaneously. However, the segmentation can be done solely in a horizontal manner. A Programmable Logic Controller is used for managing all the functions of these core shooters, and the input power requirement comes to around 3.7 kW.
Semi Automatic Core Shooters for Cold Box Processes
The next type of Core Shooters for Cold Box Processes is in the form of semi-automatic horizontal and vertical cold/hot box core shooters. They can shoot volumes ranging between 5 kg and 100 kg. Excluding gassing, shooting and exhaust, the average machine time of the core shooters starts from 60 seconds. These machines come with the features of both hydraulic and pneumatic clamping. Additionally, the segmentation of the core boxes can be done horizontally and vertically. The operations are managed with the help of an electric timer. The input power required by the unit ranges between 2 kW and 10 kW.
Features of typical Core Shooters for Cold Box Processes
Typical Core Shooters for Cold Box Processes would have a sturdy construction and a large fast-acting blow valve for the management of tough cores. The dry compressed air works in the form of amino gas carrier. They would have the air supply tank built inside and the shoot head would be interchangeable. There is a different type of core shooter for each type of requirement. Therefore, you can always find the one that suits to your cold box processes.
Related Articles -
manufacturing, foundry equipment, sand mixers, resin systems, mixer systems, mold handling systems,