|
FiberStore supply 2 kinds of WDM Equipment, that is DWDM module and CWDM module devices. DWDM modules inlcude DWDM mux/demux module and DWDM OADM module. As to DWDM mux demux, more common configuration is 2CH, 4CH, 8CH, 16 CH, 32CH, 40CH channels. Mux (Multiplexer) products combine several data signals into one for transporting over a single fiber. Demux (Demulitplexers) separate the signals at the opposite end. Each signal was at a different wavelength. DWDM Mux/Demux will be to increase more than one optical channel technology the transmission capacity to a single fiber. This is actually the one applied to the current fiber optic backbone network bandwidth laser technology. Specifically, expertise to generate is close spectral spacing in the specified fiber; multiplexing and a single optical carrier, in order to utilize the transmission performance can be performed. By doing this, considering the information transmission capacity, it might reduce the count of fiber needed. These channels are employed within the optical Mux together, after which you can through the single optical fiber transmission towards the hub or OTN, where re-use Demux to discover them. These separate channels can be routed for a single node or node group to satisfy the orientation of service requirements of the system. DWDM Mux and Demux provide high-density low-cost solution in this application. Our company offers good quality DWDM Mux/ Demux with assorted style, including ABS box, LGX box, 19 inch Rack-mount, customized design. The DWDM Modules combine or split particular wavelengths towards a single fiber and are generally idea for telecommunication as well as networking. DWDM technology use ITU standard 0.8nm/1.6nm spacing amongst the wavelengths, from 1529.55nm to 1560.61nm. DWDM Module utilize thin-film coating and micro optics package technology, One can choose from two main configurations: DWDM Multiplexer/Demultiplexer (Mux/Demux) modules and DWDM Add/Drop Multiplexer (OADM) modules. CWDM modules include CWDM mux/demux module and CWDM OADM module. The more common configuration of CWDM mux/demux module is 2CH, 4CH, 8CH, 16CH, 18CH CWDM mux/demux module. 3 Single fiber or dual fiber connection for CWDM Mux/demux can be found. The Coarse Wavelength Division Multiplexing-CWDM Mux/demux really are a flexible plug-and-play network solution, which enables companies and enterprise companies to affordably implement indicate point or ring based WDM optical networks. CWDM Mux/demux is modular, scalable and its perfectly worthy of transport PDH, SDH / SONET, ETHERNET services over WWDM, CWDM and DWDM in optical metro edge and access networks. CWDM modules (Coarse Wave Division Multiplexing) combine or separate to 18 wavelengths in to a single fiber. CWDM technology uses ITU standard 20nm spacing between the wavelengths, from 1270nm to 1610nm. CWDM Modules utilize thin-film coating and micro optics package technology. These come in two main configurations: CWDM Multiplexer/Demultiplexer (Mux/Demux) modules and CWDM Add/Drop Multiplexer (OADM) modules. CWDM Mux/Demux Modules are available in 4, 8 and 16 channel configurations. These modules passively multiplex the optical signal outputs from 4 if not more gadgets, send them over 1 optical fiber and after that de-multiplex the signals into separate, distinct signals for input into electronics on the other end within the fiber optic link. Above all, one can choose from the type of Plastic ABS module cassette, 19 rack mountable box or standard LGX box. Without any matter what style of connectors, like FC, ST, SC, LC etc, each is situated on our website, you can easliy mix connector a single device. Buy DWDM modules, CWDM modules and Filter WDM modules on FiberStore with assurance.
Related Articles -
dwdm, cwdm, cwdm mux, mux demux, cwdm multiplexer,
|
