Suppliers normally have a group of technicians who assist their customers to fix AK-47 handguards in case they are not competent enough or they do not wish do to it by themselves. The steps involved in installing are simple and one can understand how doing it through reading them. The guards come together with other elements and the stock is aimed at improving the external outlook and performance of an old gun. Basic tools that you are supposed to have so that you undertake this activity comprise of a screwdriver, a wood file and a power drill. Scrubbers will be needed as sometimes fitting adjustments are required for proper installation. Holes will be required in different parts and the right tool to do so is a battery drill with the right gauge of bits. Some of the compulsory elements for a stock set as per international standards include pistol grip, butt stock, lower and upper hand guards. Butt plate and a sling shivel are the two major elements of the butt stock . Butt stock shims are packet if the customer requests for such as they are not part of what is packed by the manufacturer. The grip is accompanied by the fasting elements which consist of a nut, bushing, washer and a screw. Always before the unscrewing of the existing parts begin, one is expected to make sure that the weapon is not loaded and the safety flag is in the right position. Push the rear button of the top cover and lift it for removal. Apply some forward force on the spring and then lift it from its position. Use a pair of pliers in unlocking the right lever so that you pull out the gas tube and the upper hand guard at the same time. The lower guard is taken out by releasing the lever found at the right corner and then applying an outward force on it. Try to test fit the new butt stock to see whether it is the actual size for your rifle and in case it is, then proceed with the tightening. If it is a bit larger than expected, then do some scrubbing using a wood file so that the right size is attained. In a situation where it is loose, apply shims so that the empty gap is completely filled. The guard for the upper side is fixed by rotating it for ninety degrees while holding the gas tube in its place. The lower guard is set up by first inserting the rear portion into the lower receiver and ensuring it is seated all the way to the base. The adjacent lever, which act like a lock, is forced to its place after pushing the front casing so that it is in contact with the guard. At this point the gun is ready for testing and this must be done in accordance to all laid safety rules as far as use of rifles is concerned. Remember that a gun should never be left unattended at any time . Unload a gun before storing it by removing the magazine and ensuring no cartilage is left in the chamber of the barrel. The best AK-47 handguards are the ones which give a perfect balance of strength and weight. The set is supposed to be easy to install with no need improvisations. Before you pay for the set, make sure that you have the right one for your model to avoid inconvenienced. When customers are in the market for AK-47 handguards, they can find AK-47 tactical accessories online. They are invited to view AR-15 grips at https://www.frontlinearsenal.com/ak-47-tactical-accessories/ak-47-handguards today.
Related Articles -
ak-47 handguards, ak-47 tactical accessories,
|