A plumber in Toronto has some plumbing information to share with you. Whether you hire a plumber or do the work yourself, it is a good idea to have a good understanding of how plumbing systems work. This type of understanding will help you sort out the problem yourself and it will also help you to speak with some knowledge to a plumber. In fact, the plumbing in your home involves several systems the work separately as well as together in some cases. The water is delivered to your home under pressure through the water supply system. Plus, galvanized steel or copper pipes carry the water to the faucets, plumbing fixtures, outdoor hose bibs and sprinklers. In addition, drain and waste plumbing is not under pressure like the supply system. It is gravity that moves the water and waste to the sewer or septic system. Plus, vent piping is coupled with the drain and waste to exhaust sewer gases and to allow pressure equalization so the drains can drain. The gas piping is completely separate from the water system but it utilizes pipes that look similar to the water supply pipes. Also gas pipes deliver gas from your utility to the gas fired appliances. In addition, a plumber in Toronto has some other information on the home plumbing system. According to a plumber in Toronto, the pipes in a house are mostly hidden in walls and floors. However, in a basement or crawlspace you can usually see enough of the pipes to figure out the paths your pipes follow. By using some simple lines and symbols you can make a working drawing of your plumbing system. When you have a drawing or map it can save you a lot of time if you plan to add a fixture, plumb an addition to the house or troubleshoot a problem. Another concern is the plumbing outside the house. Usually, water is supplied by a local municipality or utility company. The water comes into the home purified to meet the safety standards for drinking. It should also have enough pressure so that all showers, taps and appliances can run properly. Moreover, in most areas, the waste-water exits the house and goes to a municipal sewage treatment facility where it is treated and made pure again. Plus, in order to conserve water, some local systems now recycle gray water which is waste water form sinks, laundry and tubs but not from toilets. The gray water can be used for irrigation and other non-drinking purposes. Also this helps to cut down on the usage of freshwater. Furthermore, a plumber in Toronto has some more information about the plumbing in your home. The most common material used for a water supply pipe is copper. The copper piping resists corrosion so water continues to run freely and the pipes last without leaks for many decades. However, an older home might have pipes made of galvanized steel. This type of pipe tends to get clogged up with materials and rust over time and can develop leaks. These days, a lot of homes have plastic water supply pipes that are quick to install and are expected to last virtually forever. The water arrives to the home by a main supply pipe that is usually one inch in diameter or larger. In most cases, the pipe runs through at least one main shut off valve which is located outside the house in a box that is buried in the yard near the house or just inside the basement or crawl space. It usually passes through a water meter and there is likely to be another main shut off after the water meter.
Related Articles -
plumber,
|