Sublimation ink and sublimation cartridges are provided for a limited range of Epson and Ricoh printers currently, therefore it is very important to carefully select the ink, it should match the exact printing requirements without compromising quality of the image and printer mechanism. What is Sublimation Printing Process?Sublimation printing is a very simple two to three step process which depends on sublimation ink, heat and pressure. The impressive point of this advanced technique of digital imaging is that it converts solid colors into gaseous state without converting them to liquid, therefore maintaining the image quality and giving output that looks just like original object. You will find a huge collection of sublimation ink and sublimation cartridges giving you finest quality digital and textile imaging. The sublimation printing process brought a drastic change and revolution in digital and textile imaging industry. The out of the box approach of using sublimation printing process speed up and refreshed the designing and imaging concepts. CISS stands for Continuous Ink Supply System; it consists of three major parts:
1- Ink Tanks 2- Similar to original printer cartridges 3- Ink Tube, which is use to supply ink to the cartridges The process is quite simple; the ink is continuously supplied to the cartridges through ink tube from the exterior tanks. It saves you from the hassle of visiting computer store frequently and abides you to buy the conventional branded cartridges which are quite expensive. The best part of using CISS is that, there are some companies that are manufacturing CISS for all models of Epson, HP, Brother and Canon ink-jet printers. It is astonishing fact that using the conventional cartridges that are provided with the branded printers a user is paying 20-30 times higher price per printout , therefore CISS is such a blessing and can be used by installing within two-three simple steps and filling the provided ink in the tanks. Simple Steps to Install CISS in Epson There few very simple steps to follow for installing CISS in your Epson printer:
Bring all the accessories at your printer table and check for any air in the printing tubes. Check the printer for nozzle test, it is recommended to print nozzle test sheet If your printer is working perfectly, take out a colored printout before you install CISS. Place the CISS on right side of the printer and keep the air plugs out and install the air filters. Take out the Epson cartridge inside the printer and move the cartridge carrier to the left, now install the CISS cartridge into the printer and adjust the cartridge at the right place. It is very important to move the button chip at the right place otherwise the CISS will not be recognized by the printer. In order to check the tube length move the cartridge carrier to the left and then to the right side and verify that the ink tube falls on paper board. If there is any problem in the tube length you can adjust it by shortening or increasing its size, the sticker can also be adjusted to prevent tube from falling. Carefully watch the sticker it should not squeeze the ink tube when the printer cover or paper cover is closed. Now plug in the printer wire, close the printer cover and take a test printout also check if the printer makes any noise.
Related Articles -
Sublimation Ink, Cheap Sublimation Ink, Epson, Epson Sublimation Ink, Ink for Epson, CISS, Sublimation CISS,
|