|
Brick chimneys are the most common choice and can come in a variety of different sizes that vary as much as one foot to twelve feet. Many people do not realize that they need to be checked and have regular maintenance performed on an annual basis. When you choose to have these checks done you are choosing to have all of the harmful debris cleaned out. If you do not do this then you could end up with some more serious problems, refractory cement mortars are one thing that can keep you from having these serious issues. If any problems or potential problems are detected you will want to make sure that there are repairs made and that you can easily make these changes to the structure. If a repair needs to be made there are some cautions that should be taken. This is because worn out parts or problems could be unstable or become highly unstable if you do not repair or replace them in the right way. It is important to only use high silica refractory mortars so that you know that the heat is not going to transmit through the mortar. This could potentially cause fires or other problems and damages. If you have to beak out bricks then you should make sure that you use the right tools and that you know what is needed when you are replacing them with the new ones. A lot of people do not realize that all dust first has to be removed. Then you will want to wet the area prior to replacing it with a new brick. The brick should be put back in place with refractory cement mortars. If you are going to be making your own bricks then you want to make sure that you are using a proportion that is two parts sand and one part mason cement. You must mix these two ingredients together well and let them dry first. If you are mixing a lot of this material the best choice is to mix together the dry ingredients. Then you slowly add the water a little at a time and continue mixing until it reaches a thick mud-like consistency. This material can also be used in between the bricks and is considered one of the refractory cement mortars. A good way that you can easily put the brick into place is with a solid two by four. You use this to push the brick into place. This is going to help you make sure that it is in place the bricks that are already in place so that you do not have to worry about structure damages. You will then want to use the high silica refractory mortars and make sure that the joint has been sealed all the way. Then you want to check for small holes or other issues and use the mortar to be able to ensure that you are going to keep the area smooth and things safe. There are many things that have to be used when you are repairing your chimney and high silica refractory mortars are one of the best choices. If you are in the market for these or refractory cement mortars then you should check with Vitcas first.
Related Articles -
high silica refractory mortars, refractory cement mortars,
| 
