Mill production line:
Suitable for metallurgy, building materials, chemical, mining and minerals such as grinding materials processing, can be used for feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite, manganese, phosphate rock, red iron oxide, quartz sand, cement clinker, activated carbon, clay, coal gangue, gypsum, silicon carbide, refractory materials Mohs hardness below 8 humidity less than 6% of the powder processing of non-flammable, non-explosive mineral materials . Mill production line process:
The whole structure by the host, analysis machine, piping device, blower, jaw crusher, bucket elevator machine, hopper, electromagnetic vibrating feeder, distribution cabinet. Machine work process: large block material crushing by jaw crusher to the desired particle size by hoist materials will be sent to the hopper, vibrating feeder will feed evenly quantitative continuously fed into the grinding chamber for grinding powder after grinding the child has been taken away by the fan airflow analysis machine grading, in line with the fineness of the powder with the airflow into the big cyclone collector, collected separately, and then by the powder discharge pipe shall be finished powder. The airflow again by the upper end of the large cyclone collector return air duct inhalation blower. The entire airflow system of the machine is closed loop, and is in the positive and negative pressure state where the circulating flow. Certain moisture content in the grinding room grinding materials, grinding heat generated when grinding indoor gas evaporation change the gas flow, while the outside air is drawn into the machine each pipeline junction Mifengbuyan on the circulating air flow increase in the amount of wind this adjustment between the fans and the host I wind pipe to achieve a balance of airflow, and excess gas into the bag filter sub-collection of the residual gas into fine powder, the residual gas is purified and discharged.
Related Articles -
Mill, production, line,
|
