Recurring soil after cleaning- Often as cleaning takes place, the cleaning results appear to be satisfactory. However, following drying, soil seems to reappear. Often this can be attributed to dry soil that has been carried to the surface by the water during evaporation. As drying occurs, this soil "wicks" back to the surface with the evaporation process. Repeated cleanings will reveal the same result. |
Resoiling following cleaning- Resoiling is different from recurring soil in that resoiling takes places over a number of days or weeks following cleaning rather than immediately following drying. Often resoiling can be attributed to detergent residues left behind during cleaning. Detergents, by design, attract soil. By leaving detergent in Carpet after cleaning, detergents rapidly attract soil. To limit this occurrence, we discourage the use of detergent in the extractor rinse tank. Detergents only should be used as a prespray and should be rinsed with an extractor using fresh water only.
Thorough vacuuming should be performed prior to cleaning to remove dry soil. Thorough soil removal prior to cleaning can lessen the effect of soil wicking. By limiting moisture with the use of a dry absorbent compound, such as Host, following complete drying, wicked soil can be extracted from the surface. Possible Resoiling
Have you ever heard the expression "Don't clean your carpet because it gets dirtier faster after it is cleaned". Its true! in many cases. Most cleaning solutions leave an oily or sticky residue on carpet fibers that attracts soil like a magnet. The same is true for many grout cleaners, kitchen vinyl cleaners, and other floor cleaners. Once you clean these surfaces, they seem to become dirtier, faster.
Also, to prevent chemical manufacturers from bottling water for cleaning, a cleaning efficacy test has been designed using a similar procedure. A standard for cleaning results has been established and products are compared to this standard. Few products meet both of these cleaning efficacy and resoil potential standards. Some carpet cleaning challenges like resoiling occur quite frequently. Recognizing these normal carpet cleaning occurrences and understanding how to correct them may save you thousands of dollars to prevent carpet replacement.
It is essential to conduct a good pre-vacuuming prior to conducting any other cleaning job on the carpets. More than 79% of the soil content in carpets is actually dry soil hence with pre-vacuuming the bulk of the dry soil can be removed. If a cleaning agent is added to the carpets prior to conducting the pre-vacuuming, it would only create a bigger mess. That is why these companies follow pre-vacuuming before the actual process. The second step is known as pre-treating. This process especially comes in handy when there are a number of different trouble spots and heavily soiled areas.
When it comes to the actual cleaning process then one have a number of choices to go for. One of the most widely used techniques is deep steam cleaning. With the kind of modern equipments available to carpet cleaning companies, one will have the carpet deep steam cleaned and ready to use fully dry and deodorized in a matter of couple of hours. This technique is only ideal for places that receive heavy traffic and consequently have a high soil content.
Go to main page Auckland Carpet Cleaning for best reliable assistance on the job
Related Articles -
Carpet cleaning, carpet cleaning Auckland, carpet cleaning northshore, carpet cleaning west auckland, carpet cleaning south Auckland, carpet cleanings,