If you are just starting out with fasteners in Calgary, you may be asking yourself why there are so many of them on the market. It's a valid question. With so many fasteners on the market, it can be hard for the novice to figure out which one to use for a particular job. It's important to realize that all the fasteners on the market have a good reason for existing. Let's take a closer look at two very popular fasteners: screws and nails. We will shed some light on the differences between these two fasteners. By the end of this article, you should know when to use a screw and when to use a nail. So what are the differences between a screw and a nail? The first thing you will notice is that a screw will have threads on its shaft. The threads help the screw grip the material it is being inserted into. When you examine a nail, you will notice that it has a smooth shaft. The shafts of these two different types of fasteners determine how they are inserted into material. A screwdriver is used to turn a screw. A hammer is used to pound a nail into a material. Among screws, there are some that require special screwdrivers. For example, you will need a hex screwdriver to work with hex fasteners in Calgary. In most cases, any hammer can work with any nail. There are times when hammer size will vary, but a person can usually get away with having only one hammer in his/her toolbox. Since you now know the difference between the two fasteners, you probably want to know when to use one over the other. When something has pressure from the sides, it is best to use a nail. When working with material that connects from the top or bottom, it is usually best to use a nail. Holding power is another thing to consider. For example, if you are working with wood, a wood screw will offer superior holding power when compared to a nail. The wood screw will take more effort to work with, but it's up to you if the effort is worth the results. In both cases, you can use glue to increase the strength of the joint. There are times when looks play a part in your choice of fasteners in Calgary. You can drive nails deep into the surface of wood. You can then fill the hole over the nail. For people looking at the finished project, they won't even know a fastener was used. If concealment is a consideration, a nail is the fastener that you should choose. It should be noted that screws can also be concealed, but it typically is harder since the head will have a larger surface area. The thickness of the material you are using will also play a part in your choice of fasteners in Calgary. For example, if you are working with extremely thin wood, using screws may be impractical. You will have to use a thin nail. The case is the same for thin metal. Remember, delicate joints can be reinforced with glue. Don't get caught up in favoritism when it comes to nails and screws. Approach all of your jobs without any bias. You want to assess all the aforementioned factors before deciding on the right fasteners and tools for the job. Remember, there are times when you can use both screws and nails to complete a project. You can use the two different types of fasteners on the same side of a surface. It's all about what works best to get the job done.
Related Articles -
fasteners,
|