Renovating a kitchen can be an expensive and time-consuming endeavor. New cabinets, appliances and flooring don't ordinarily come cheaply and can consume a modest budget quickly. Repainting cabinets is a great way to put a new face on a kitchen without breaking the bank. While most modern cabinets are wood, some do-it-yourselfers have non-wood materials such as steel or laminate. Don't let the challenges of painting these surfaces deter you from tackling this weekend project. Instructions as follows: Firstly, remove dirt and grime from surfaces with an all-purpose cleaner, warm water and a sponge or a terry cloth rag. Use mineral spirits to remove stubborn grease. Rinse the cabinets with clean water and wipe dry. Secondly, sand surfaces with 150-grit sandpaper to degloss, which provides adequate roughness so new primer and paint can adhere. Rinse with a clean, damp cloth or tack cloth. Thirdly, prime plastic laminate and bare steel with oil primer. For extra holding power on laminate, use a solvent-based bonding primer. While spraying the primer assures a smooth surface for the top coat, you can use a brush or a roller. Allow the primer to dry overnight. Bonding primer needs two or three days to dry. If the paint on steel cabinets is intact, primer is unnecessary. Fourthly, sand with 220-grit sandpaper to remove dust and dried paint bits from the surface. Wipe clean with a damp cloth or tack cloth. Fifthly, pour a small amount of paint into a paint pan or bucket to avoid contaminating the paint can with debris and paint clumps. Apply the top coat with a 3-inch brush, working in long strokes. Brush with the grain by moving in the same direction the grain would be if the surface were actually wood. This usually means up and down. Allow to dry overnight. Sixthly, apply a second and third top coat, if desired. Sand with 220-grit sandpaper between coats, but not after the final coat. Clean with a cloth and allow each coat to dry overnight. Tips & Warnings If you prefer to use spray primer and spray enamel for the job, you will achieve a smooth, even finish. If you're painting an entire kitchen sink, spray cans are not a viable option. Removing doors, drawers and hardware makes working on each piece more convenient. Update the look of your slatecabinets with new hardware that uses the same holes as the old hardware. You can start over with an entirely new style, but you'll need to fill unneeded holes, sand them smooth and prime before painting. Filling and smoothing holes in metal cabinets may yield uneven results; stick with hardware that fits the original holes. Finally, let me have a conclusion. As a renowned business E-platform of promoting stone industry, we have been continuously merging all kinds of resources together, in which regard not only have we realized the strategic combination of Stones Yellow Pages and overseas famous stone magazines, but also our good cooperation with overseas stone associations and organizations. If you are interested in us and want to consult us freely, you can also see onyx slab or become a loyal follower of us by @ https://twitter.com/stonebtb.
Related Articles -
cabinet, kitchen,
|