With the constantly development of society, people has more and more demand for fiberglass wall board  . Fiberglass wall board is a kind of ceiling materials that are mainly used by people in today. It also belongs to the fiberglass ceiling board. Due to the increasing demand for this kind of material, there are many manufactures in the decoration market. Some of the manufacturers may just focus on the production. While few manufacturers also pay attention on the processing services. These companies invest a lot of money on hiring skilled and experienced technical engineers who has the ability to cut the products into different size according to customer demand, and these technical engineers can also process the product according to the drawing or stamping components, bottomed out will be plus or minus tolerance. Fiberglass wall board is made of the composite materials glass fiber composite materials synthesis and high heat resistance materials. This kind of material doesn’t contain the contain asbestos ingredient which is harmful to human health. It has high mechanical properties and dielectric properties, good heat resistance and wave resistance, good processability. It mainly used in the plastic mould, injection mould, machinery manufacturing, molding machine, drilling machine, injection molding machine, motor and PCB. ICT fixture, the grinding plate. The thickness of this kind of materials is generally more than 0.1mm. The specification is 1022mm*1200mm,600mm*1000mm. It has high mechanical properties and dielectric properties, good heat resistance, wave resistance and good processability. Usage: As insulating structural parts in electrical equipment, including the design of the switch. Electrical insulation, carbon film printed circuit board, tooling fixture with drilling pads of the computers and other PCB test (frame) it can also used in transformer oil and some humid environment conditions. An individual structural glass fiber is both stiff and strong in tension and compression—that is, along its axis. Although it might be assumed that the fiber is weak in compression, it is actually only the long aspect ratio of the fiber which makes it seem so; i.e., because a typical fiber is long and narrow, it buckles easily.[3] On the other hand, the glass fiber is weak in shear—that is, across its axis. Therefore if a collection of fibers can be arranged permanently in a preferred direction within a material, and if the fibers can be prevented from buckling in compression, then that material will become preferentially strong in that direction.
Related Articles -
Fiberglass wall board, ceiling materials,
|
