The natural resources are currently increasingly strained, the contradiction between people and the natural environment will be more prominent . How to conserve natural resources and maintain the ecological balance of the earth for a long time is an important issue we face. Over a long period of time, the energy consumed by lighting has been dominated a large amount of human energy consumption,20%—50% of the total energy consumption of family and office are from lighting. LED light source as a new generation of energy-efficient lighting products, due to its energy saving, environmental protection, long life, environmental adaptability, etc., more and more countries have been paying the focus of attention. Nowadays, LED light source is more and more popular as costs decline, every country also put forward their own demands on the LED lights and LED lighting energy efficiency of detection. This article will make a brief introduction on what the major European energy certification requires the LED light source and lighting. European energy efficiency requirements European energy efficiency requirements mainly based on the requirements of ErP of the EU as a representative. ErP Directive is the same as LVD Directive, EMC Directive, which has also been incorporated in the EU's CE system. Therefore the product can’t mark on the nameplate of CE and designated agency isn't responsible for market surveillance until related products involved must meet ErP requirements, which is the enforcement requirements of the EU. In lighting products, since 2009 the EU introduced EC244/2009 for non-directional light sources (mainly halogen lamps, fluorescent lamps) and EC245/2009for fluorescent tubes, ballasts and accordingly luminaires composed, after December 2012 launched EU1194/2012 for all LED bulbs and directional light sources, we focus on briefly introduction on the following relevant requirements of LED lighting products. First, it is divided into three phases to achieve this requirement, the first stage is September 1, 2013, the second phase is September 1, 2014, the third stage is September 1, 2016. It requires compliance EU1194 range includes LED light source must meet the requirements EEI According to regulations, each testing requirements are required that 20 samples were averaged and judge to forms required. The throughout test period is at least 6000 hours. Li Sida lighting products are exported to Europe, the product passed CE European quality system certification, Li Sida lighting insists on producing qualified LED light for the user environment and the purchasing power,the LED flood light, LED tunnel lights, LED tube and other indoor and outdoor products have been widely praised, possessing a complete set of professional production and R & D system meet a variety of indoor and outdoor LED lighting R & D and manufacturing,its home page www.lead-lighting.com owns humanity design and detailed product description for the global users, Li Sida Lighting determine to alleviate global warming and abnormal weather with all environmental enthusiasts and users by virtue of energy saving LED lighting.
Related Articles -
natural resources, energy consumed, brief introduction, efficiency requirements, Europe, LED light, LED flood light, LED tunnel light,
|