A time will come in the future when you need to sharpen your olfa safety knives and scraper blades. It really is an absolute must to do it with correct care and attention. A knife that isn’t maintained properly will be less effective than it could be. Depending on the type of knife, knives and blades need to be sharpened at different angles. Some knives are easy to sharpen than others but there are sensible rules that you can follow when sharpening a knife. A good way to check the sharpness of your olfa safety knives and scraper blades is by tilting their blades under a bright source of light. As you turn it to the light and study the blade, make an effort to notice how the light reflects upon the bevel of the blade. If the olfa safety knife or scraper blade is in a good condition and is in great working order, the bevel should appear to be flat. By following these simple knife maintenance steps, you can be sure that your olfa safety knives and planer blades last for years to come. When sharpening your olfa safety knives and scraper blades, it is advisable to follow these few steps to make sure that you do not scratch or break the blade. When assembling the blade, put the blade into the honing guide to make sure that it holds it in the bevel - side down position. After doing this, adjust the blade so that the full bevel connects to the surface. Before sharpening your olfa safety knives and scraper blades, your whetstone needs to be oiled and tapping oil is great for this. The next step of the process involves removing any nicks on the blade of your olfa safety knives or scraper blades. If there are blade nicks that need removing from the surface of the blades, it is a must to apply the course side of the whetstone. Whilst you are getting rid of the blade nicks, you must make sure that the blade is worked with a pushing action rather than a pulling action to ensure that the edge of the blade does not result in burring. After you have removed the nicks from your olfa safety knives and scraper blades, you must then move the planer blade across the whetstone by applying pressure wherever there is a bit of resistance in the movement of the blade. This may result in a curved edge on your scraper blades or olfa safety knives, so you need to be very careful. If this does happen, you may need to reshape the blade a second time. Know more about Olfa knives please visit here for more information: http://www.knife-point.co.uk/olfa-knives--rotary-cutters-24-c.asp It is really important to look after your olfa safety knives and give them the care and attention they need to work effectively. These steps will ensure that your knives and blades last for years to come.
Related Articles -
Stanley Knife Blades, Olfa Knives, & Blades, Tersa Knives,
|