|
|
|
Replace a Bathtub Faucet by Vicky Smith
|
|
|
Replace a Bathtub Faucet |
|
|
|
Business
|
|
Often a leaky bathtub faucet can be fixed, but if the diverter will no longer force water up to the shower without leaking, it is time for a new faucet. Luckily, replacement options are vast at local home improvement stores and via the Internet. The replacement is a simple procedure and takes less than an hour. Specialty tools are often not needed, but can sometimes make the job easier. Step 1 - Remove the Old Faucet Check underneath the faucet for a set screw holding the faucet in the shower room. If there is, use a small screwdriver or allen wrench to undo the screw. The faucet should come off easily once the screw is removed. If no set screw is present, place the wooden handle of a hammer, screwdriver or other tool that will fit inside the opening of the faucet and firmly turn counterclockwise. Make sure to use a wooden handle, to avoid damage to the faucet. Use the tool to turn until the faucet can be removed by hand. Once the faucet is removed, the spout nipple will be revealed. Step 2 - Purchase a New Faucet With the old faucet in hand, go to the pluming department of a home improvement store to purchase another one of identical size and style. The stem which supports the faucet is specifically sized and so identical sizing can be important. If an identically sized faucet cannot be found, a new spout nipple can be purchased to fit the new faucet. The style of the faucet cannot be altered, however. A slip on faucet (with a set screw) must be replaced by a slip on faucet. A screw on faucet, must be replaced by a screw on faucet. Step 3 - Attach the Spout Nipple If a spout nipple needed to be purchased, or if the new faucet came with a new nipple spout, the old spout needs to be removed. At the base of the spout is a bonnet nut. The bonnet nut will normally be visible, but at times can be recessed. Use the pipe or basin wrench to remove the bonnet nut and the stem will come out with the bonnet nut. If significantly recessed you need an internal pipe wrench. Attach the new nipple spout using Teflon tape around the nipple threads and thread the bonnet nut on the end. Screw the bonnet nut back into place with the new nipple attached. Step 4 - Attach the Faucet Apply Teflon tape around the threads on the nipple spout and thread the faucet onto the nipple. Attach the faucet one turn past fingertip tight. Do not over-tighten the faucet, as it can bend the spout nipple. Be especially careful if the spout nipple is copper. Spread caulk around the joint where the faucet meets the wall to seal the new faucet into place. This is often not necessary, but can be applied as a precautionary measure. Finally, let me have a short conclusion. As an outstanding business E-platform of promoting stone industry, we want to match global supply and demand resources and promoting the mutual prosperity and development for worldwide stone industry trade. If you are interested in us and want to consult us freely, you can also see marble countertop or become a loyal follower of us by @ https://twitter.com/stonebtb.
Related Articles -
bathroom, sink,
|
Rate This Article |
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
Reader Opinions |
|
|
|
|
|
|
|
|
Author Login |
|
|
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
SUSAN FRIESEN
Susan Friesen, founder of the award-winning web development and digital marketing firm eVision Media...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|