|
Most people install garage doors and forget about their maintenance though they use them regularly day-in and day-out. If you want to see that your garage door functions smoothly without any problems, then there are a few things you need to do regularly. You need to give a good squirt to the rollers, hinges, roller tracks and latches using a penetrating solvent like WD-40. You may also use a citrus based solvent alternatively. You need to lubricate the pulleys found on extension springs and the bearings that you see on torsion spring openers. If you find the torsion spring rusty and binding up, then you will need to wipe some oil on it. Once you wipe all the parts clean, then apply a light kind of oil like 3-in-one lubricant to the parts. If you find a roller or hinge getting struck, then you can soak it in kerosene for some time. Make use of a old toothbrush to clear the deposits inside the cracks. Steel wool will be highly helpful in removing any rust. Once you wipe all the parts thoroughly, use a lubricant. If your garage door is operated by a chain drive or screw drive, then consider applying the same lubricant to the full length. Check whether the weather stripping along the sides of the garage door is alright. You need to probably adjust the door if it is jamming against the sides. Under worst conditions, you will need to replace the weather stripping. If your wooden garage door does not have a weather stripping, ensure the bo0ttom is properly sealed or painted. You may also consider adding weather strapping if necessary. Spring or fall is a good time to attend tot eh annual maintenance of garage doors. If you inspect your garage door regularly and troubleshoot little problems as they creep up, then you will have a trouble-free garage door. This will help you avoid expensive repairs. Property owners can easily attend to routine maintenance themselves. Most garage doors depend on big, thick springs to open and close properly. You will find the springs mounted above the opening or fixed alongside the roller track on either sides. Visually inspect the spring from time to time and detect any signs of wear. If you find the springs squeaking while opening or closing the door, make use of a lubricant. If the springs are found work out or the squeaking continues after lubricating, then you may probably need to call a garage door professional. Remember, tampering with the springs yourself without any appropriate implements can be dangerous since they are under heavy tension and can cause serious injuries. Metal cables are used to connect the spring to the door bottom on either side. If you find the cable worn or frayed, then you can let a garage door expert inspect it and give a feedback on it. It is not advisable to wait till the cables break. You will find brackets on either sides of the door to which the cables are connected. These brackets are under a heavy tension. Examine whether they are firmly attached to the door. If not, call a professional for help. It is not advisable to loosen or adjust the bracket yourself. Newer models of garage doors come with tamper proof brackets that prevent non-professionals from adjusting them. You need to be careful while dealing with your garage door yourself to avoid pinched fingers. You should never stick your fingers between the sections while attempting to lower the door. If this happens, then it is most likely that the fingers are pinched. Make use of the handles always to manually lift or lower the garage door. Promaster is Leading company offering residential and commercial garage doors across Canada. For details about taking Garage Door Service Vaughan and Garage Door Service Toronto please visit Promaster.ca
Related Articles -
Garage Door Service Toronto, Garage Door Service,
| 
