Modern Network Cabling Needs Fiber Optic Cables

Most cabling professionals use three basic kinds of cables because both versions is discussed below:

• Co-axial cables: probably the most commonly used cables for establishing a wide range of networks. The co-axial cables include a copper core which is enclosed in foil insulation and is then covered with a layer of braided metal shielding. In areas which have problems with advanced level of interference, Network cabling installation professionals generally use co-axial cables having additional layers of both foil insulation and braided metal shielding.

• Twisted-pair cables: generally split into two sub-categories, namely shielded twisted-pair cables and unshielded twisted pair cables. The cables have core of your pair of insulated copper wires which are wound around one another. As a result of the twisting of the couple of cables, the interference caused by noise or other signals emitted from various gadgets put into their vicinity is minimized.

• Fiber optic cables: undoubtedly given greater preference by network cabling installation professionals, especially in cases when the protection, quality and high speed bandwith are of utmost importance. These cables use high-speed modulated light pulses to transfer data and contain both sending and receiving strands. The main of each of these strands is made from extremely thin glass, which is enclosed within con-centric layers of glass referred to as cladding. Each cable contains one sending strand and receiving strand that are then covered by a protective jacket to make it able to sending in addition to receiving data without having affected its quality.

• 1. Fiber optic cable can carry signals approximately 50 times longer as compared to the copper wires, because it has very low signal loss rate, and doesn't require a signal repeater to maintain the integrity with the signal over long distances, unlike the copper wires.

• 2. In a cabling system that involves copper wires, you'll be able to detect a sign which is being transmitted through the cable remotely, which eventually presents the loopholes in their security. However, it is not possible regarding fiber optic cable because its dielectric nature can make it impossible to detect the signals remotely.

• 3. Fiber cable has long length, small diameter, and is very light-weight, which eventually makes the installation and upgrade process pretty easy and inexpensive if compared with copper wires.

• 4. This sort of cable provides higher bandwidth and knowledge transfer rate, which eventually cuts down on download some time and increases the network efficiency.

• 5. This cable can be installed in high Electromagnetic Interference (EMI) areas, because it does not have metallic wiring, which eventually makes it completely resistant against EMI.

• 6. This networking cable is very durable and long-lasting, and can be relocated many times.

Related Articles - Network Cabling, Fiber Optic Cables,

Email this Article to a Friend! Receive Articles like this one direct to your email box! Subscribe for free today!