|
|
|
Low Air Pressure down the Hole Bits' Service Life by cherry sun
|
|
|
Low Air Pressure down the Hole Bits' Service Life |
|
|
|
Business News,Science & Technology,Import - Export
|
|
Low Air Pressure down the Hole Bits, such as CIR Series Low Air Pressure down the Hole Bits, has become an important drilling bit in the drilling constructions. As one of the professional drilling tool manufacturers, our company provides our customers with rock drill tools OEM. In order to make a best use of the bits, we should know some factors that affect the using of it. In fact, the structure design of the down the Hole Bits affects the service life of it. With the development of hole blasting and mining technique, DTH Bits, featured by high efficiency, safety and environmental protection, simple construction, easy operation, have a rapidly development in the world. However, there are some unpredictable factors during the using process become of bad environmental situation, which affects the service life of the drilling bits. Through a long-time research, people find that the construction of the bits also affects the service life of the bits except the working condition, operational method, the drilling weigh and the geologic construction. Practice shows that good construction of the drills, which includes the shape and arrangement of the carbide inserts, the lateral angle of the bits as well as the powder groove on the top of the drill, makes a big influence on the service life of the down the Hole Bits. The carbide inserts of the drills is one of the factors that affects the service life of the down the Hole bits. The function of the carbide inserts is to transfer the energy power to drill on the rocks. The choosing of carbide inserts material is very important, because some material is not so hard that is easy to be broken. Of course, the arrangement of the inserts also affects the service life. In such a case, the drilling bits we choose to use should be according to the land formation of the rock and practical application of the drilling bits. The widely used inserts includes conical inserts and button inserts. As for conical inserts, contact surface between rock and the drill is small so that the resistance it suffered from is small. As a result, the drilling speed of the bit is fast. But at the same time, the volume of the conical inserts is thin, so the inserts are usually easy broken. As for button insert, it has the better blending and distorting ability comparing with other insert. Consequently, it has been mostly used in the more compulsory and harder rock formations. But since the contact area with the rock, the resistance it suffered from is bigger, so the drilling speed of it is slower than other bits. The powder groove on the top of the drill is another factor that affects the service life of the down the Hole bits. The depth of the powder groove should be according to the drilling weight, the land formation of the land, the diameter of the drill and so on. Generally speaking, when the drilling weight is big and the rock formation is hard, the depth of the powder groove can be relatively small. To sum up about the discussion mentioned above, it is not difficult for us to make a conclusion that the construction of the down the Hole Bits affects the service life of the drills. In such a condition, in order to make a best use of the drills, we should consider all the factors that may affect its using.
Related Articles -
Low Air Pressure down the Hole Bits’ Service Life, rock drill tools OEM,
|
Rate This Article |
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
Reader Opinions |
|
|
|
|
|
|
|
|
Author Login |
|
|
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|