|
The most dashing and stunning cars today in the world are manufactured by the Bayerische Motoren Werke AG , commonly known as BMW based in Germany. The car is mostly owned by high net worth Individual throughout the world because of its stylish looks, comfortable interiors, great varied features and functionality. Hence, the price of the car is also very high. It is but obvious that the functionality of the BMW cars is highly complicated and can be understood only by expert engineers. To diagnose a BMW, a diagnostic system known as BMW ICOM is being used by engineers these days. It has become a trend to look for shortcut way of diagnosing BMW through programming and this possible only by installation of BMW ICOM program. This program is widely used by Germany’s BMW Engineers largely. This program allows diagnosing and setting coding system. To connect the BMW car to the BMW ICOM, open up the driver’s seat door. Beneath the dashboard, near the brakes into the leg-space, you will find a 16 pin-receiving Data Link Connector (DLC). Now, different models of BMW have DLC located in different locations. In some models, it can be located easily while locating in some models can just be troublesome. You could go through the online guide of your model to locate the DLC. Connect the BMW ICOM A+B+C diagnostic to the DLC outlet. Now turn on your BCOM ICOM device. Turn the ignition of your BMW car on. This will activate the BMW’s electrical array. Some BMW models need an active engine also to establish a successful connection. After few seconds, the device and your BMW car’s diagnostic system will establish a connection. Some devices are already pre-programmed because of which they immediately starts retrieving trouble codes active in the vehicle, as soon as some incoming data is detected. On the screen of your BMW diagnostic tool, codes start getting displayed. These codes are in alphanumeric patterns. The first letter of the code specifies the location where the problem lies. Codes related to anti-braking are purely numerical. Sometimes a message saying “pending” is displayed which means that one of the cars’s warning lights have not gotten activated. Once when all the trouble codes are obtained, get their definitions from the BMW ICOM handbook. Thus, all the problems have now be defined and even located. If you have the required experience and expertise, you can opt for DIY fixing. But there could be some complex problems which would be solved only by trained engineers and mechanic. The BMW ICOM is the latest programming diagnostic tool used by BMW engineers to diagnose problems in the vehicle. There are latest features included into this programming which includes programming, diagnosing, activating the new features, and updating the existing system and firmware. Simple functions of AC not starting automatically can also be fixed by just entering few commands. This programming is just apt for diagnosing BMW cars smartly. Smallest of the smallest problems can be detected easily and be fixed to obtain smoother functionality of the car.
Related Articles -
BMW ICOM, BMW ICOM A2, BMW ICOM B,
| 
