|
How to choose top quality diamond circular saw blades? I am sure too many people want to know the right answer for this question, don’t worry, before knowing its answer, it is recommended to know these basic knowledges about diamond circular saw blades. Firstly, about the diamond strength Believe it or nor, in order to have the good cutting performance of diamond circular saw blade, you have to pay attention on diamond strength because it is one of important index. Generally speaking, diamond strength should not be too higher or too lower because if it is too much higher, diamond crystals are not easy to be damaged so that during the cutting process grinding materials would be polished greatly and then its sharpness would be declined, finally diamond saw blade cutting performance would become very poor. On the other hands, if its strength is not enough, after being impacted, it is easy to bed damaged and sometimes cutting works can not be finished with such poor saw blade. In short, diamond strength should be between 130N and 140N. Secondly, about diamond particle size As usual, when the diamond particle size is thick and single, saw blade tool bit would be more sharper and under such condition its cutting efficiency is too much higher, however, there are also some obvious disadvantages, for example, diamond agglomeration’s bending strength would be reduced. If diamond particle sizes are thin and inside there are too many thin article sizes and thick article sizes mixed, saw blade tool bit would be more durable, but its cutting efficiency is lower so that people are not likely to choose such saw blades. As for the best diamond particle sizes, according to the saw blades experts, it should be about 50/60. Thirdly, about binding phase In most cases, when buying diamond circular saw blades, people are likely to pay more attention on the diamond condition because it is main raw material, however, it is not right because saw blades cutting performance is not dependent on the diamond condition, but dependent on the collocation between diamond and its binder, sometimes you can understand that it is the integrality of tool bit made from some composite materials. Take the marble cutting for example, because it is the soft stone material, therefore its mechanics performance of tool bit should be lower relatively and at this time, it is better to choose copper-based binder. For the same reason, you have to choose right binder for different materials cutting. Various Circular Saw Blade wholesale are offered at Flostools, which is one industrial saw blades manufacturer in China. At here, you can find Panel Saw Blades, Plastic Saw Blades and other at low price.
Related Articles -
Diamond Saw Blade, Circular Saw Blades, Buy Saw Blades,
|
