It is the common sense that circular saw blades should be grinded in time with right ways, and what’s more, in most cases, in order to get better grinding result, you should ask for the professional saw blade grinding workers. Take the diamond circular saw blade grinding for example, during the whole grinding process, you have to pay attention on these aspects introduced in the following article. Firstly, grinding wheel quality and the width of grinding wheel particle size When selecting the grinding wheel to grind diamond saw blade, please not to neglect the grinding wheel particle sizes because it is one of important factors which will finally affect grinding results, as usual, griding wheel particle size should not be too thin or too thick, if it is too thick, after being grinded, you will notice that there is trace on its surface, on the other hands, if it is too thin, during grinding process, it is easy to be blocked and the amount of grinding is limited, what’s worse, tool bit is likely to be burned. As for the grinding wheel diameter and grinding wheel thickness, they should be different according to the alloy’s size such as its length and width or different saw teeth shapes, in short, you have to choose right grinding wheel for specific grinding. Secondly, grinding head feeding speed, believe it or not, the circular saw blade’s grinding result, better or poor, are fully dependent on the grinding head feeding speed, according to the professional saw blade grinding workers, the feeding speed should be between 0.5 mm per second and 6 mm per second, and it is not right to exceed such range. In other words, about every minute, the number of grinding saw teeth should be less than 20, otherwise feeding speed should be too much higher, which is easy to burn saw blade and even result in built up edge. Meanwhile, concave-convex condition on grinding wheel would affect saw teeth accuracy and grinding wheel would be wasted under such condition. Thirdly, the quality of cooling liquid Have you used cooling liquid during circular saw blades grinding process? In fact, it is important and necessary. As you know, there would be a large amount of tungsten power and diamond grinding wheel powder, once not being cleaned on saw blade surface in time, you can not find its degree of finish and meanwhile, there is no chance to cool alloy down. Let me introduce Flostools to you, which is the professional Circular Saw Blade manufacturer in China. You can get Panel Cutting Saw Blades, together with Plastic Saw Blades at here with affordable price.
Related Articles -
Circular Saw Blades, Saw Blade Grinding,
|