What is a Silicone Gasket? A gasket is a packaging material that the industrial manufacturers set up between machine parts or where pipes or tubes meet to avoid the leakage of a gas or fluid. Different varieties are available for gaskets such as FBD gasket neoprene, FBD gasket silicone, and Silicone O rings etc, based on their application. Salient Features: Temperature: FDA-approved gaskets must be able to withstand extreme temperatures, ranging from -80°C to + 260°C. Pressure and Compressibility: Gaskets must hold up against a higher level of pressure, particularly, 1,150 weight of power per sq. inches (1,150 psi) at 70 bars to so that a very huge flow of material can successfully go through without rupture or crack. Furthermore, gaskets must be able to withstand external pressure. According to FDA standards a gasket should be able to hold up against at least 6% compression of its mass. Creep Relaxation: Creep relaxation is a testing method which is used to test the ability of a gasket to maintain the given compressive stress as a function of time. The principle involved in this method is applying compressive stress first and then measure time taken by a gasket to recover or relax. According to FDA guidelines, a gasket should have a creep relaxation of 23% at 192 degree Celsius after initial compression pressure of 5000 psi is applied. Tensile Strength: Tensile strength is a statistic of the highest possible pressure an item can withstand before its cross-section then contracts considerably. As per FDA standards, the gasket should possess 2880 newtons per 20 square meters. Leakage: Gaskets should have very less leakage, FDA standards say that it should have only 0.09 ml / hr leakage, under a pressure of 2000 psi at 0.07 bar. Find the best FBD Gasket Silicone on www.amulpolymers.com, which is the only company manufactures the genuine silicone products for many industrial purposes.
Related Articles -
FBD Gasket Silicone, FBD Gasket neoprene, Inflatable Gasket,
|