Pool Heaters by ridvick thomson


Pool Heaters by RIDVICK THOMSON
Article Posted: 11/06/2013
Article Views: 51
Articles Written: 9 - MORE ARTICLES FROM THIS AUTHOR
Word Count: 516
Article Votes: 0

Pool Heaters

Business

Pool heating systems have some different characteristics for residential consumption, which need to be known to get a good performance of the equipment chosen for a particular function, because the water temperature varies according to the activity in the pool. These characteristics are: • The heating requirements in residential pools, clubs and academies the temperatures vary from 28 and 30 o C. • Heating requirements in pools used in competitions are around 26.5 o C. • Pools used in physiotherapy have the heating requirements ranging between 33 and 35 o C. These factors indicate the need to control the temperature of swimming pools through pool heaters are very important. The most efficient way to control a heating system is to make use of automated devices in which preset time starts and ends the heating process of the pool water. A second important aspect is that the volume of the water in the swimming pool is much higher than in a reservoir for residential use, therefore, the heating requirement to rise the temperature of the water is high as well. Therefore, an ideal heating system is the one which permanently retains the water temperature according to its usage rate. This factor should be treated with care, because it can harm the performance of a heating system if it is not taken into consideration. Basic operation of pool heaters The pool company in Naples Florida describes the following operations of a pool heater. • Using the existing pump, the pool water is directed through a series of valves to the solar collectors. • Pool water enters the solar collector from below and up through the individual tubes of the collector. • When water passes through the manifold it is heated by radiant energy from the sun. • The water returns to the pool to repeat the cycle until the pool has been heated completely. The following are some factors that must be considered when sizing a pool heating system. The main ones are: • The location where the system will be installed. • What are the dimensions of the pool that is to be heated. • What will be the application of the pool (domestic laser, laser group, academia, therapy, etc.) • What is the solar incidence in the region where you intend to install the solar collectors? • Existence of significant shadows. Materials for pool heaters Usually pool service companies make use of heaters that are made exclusively of plastic. They can be hard and brittle or soft and flexible, in concordance with plastic mixed wine. The use of plastic allows the operation of the solar system with chlorinated water in the pool, but it is always necessary to consider the chlorine content. A high dose (from 5 mg / l) may damage the commutator. The exact boundaries, from which damages occur depends on the composition of the plastic. Plastics are also used for tabulations, being not both, made from rigid hoses. Types of plastics that can be used are: • EPDM, Ethylene Propylene Diene Monomer; • PP, PP; • PE, Polyethylene; • PVC, polyvinyl chloride • ABS, Acrylonitrile butadienestireno • Find more information relating to Pool Heaters, and Professional Pool Service here.

Email this Article to a Friend!
Receive Articles like this one direct to your email box!
Subscribe for free today!

Rate This Article

Do you Agree or Disagree? Have a Comment? POST IT!

Reader Opinions

Submit your comments and they will be posted here.

Make this comment Public or Private to the Author only:

Name:

Email:
*Your email will NOT be posted. This is for administrative purposes only.

Comments: *Your Comments WILL be posted to the AUTHOR ONLY if you select PRIVATE and to this PUBLIC PAGE if you select PUBLIC, so write accordingly.

Please enter the code in the image: